Download FAG Motion Guard CONCEPT6, Automatic single
Transcript
During operation Special dispensing operations Machinery downtime Check regularly: ■ Seal integrity of the lubricator, the feed lines and the connections ■ Lubricant fill level ■ Correct position and finger tight screw mounting of all components. Calculate the modified dispensing time and incorporate this into the remaining running time of the lubricator and into the lubrication and maintenance plan. Malfunctions If the control system is showing a malfunction, the reason will appear on the display. Further information is contained in the defect table on page 24. Deactivation Hold the “ON/OFF SELECT” key down for longer than 4 s, until the residual volume display Figure 13 , page 16, disappears and is replaced with the display “--”. All lubricator settings remain stored so that the program can continue from the point at which it was stopped upon reactivation. Schaeffler Group Industrial BA 10 17