Download SLX-10MG-1 Managed Industrial Ethernet Switch

 p
7 fast Ethernet 10/100 RJ45 ports
p
1 Gigabit Ethernet 10/100/1000 RJ45 port
p
2 Gigabit combo ports for copper or fiber
PRODUCT DATASHEET
SLX-10MG-1
SLX-10MG-1 Managed Industrial Ethernet Switch
PRODUCT DATASHEET
n
High port count in a small footprint
n
Truly rugged design with -40 to 75°C operation
PRODUCT DATASHEET
Sixnet Networking
Series
Easy to configure
management functions
SLX-10MG-1
n
10 PORT Real-Time-Ring™
INDUSTRIAL
ETHERNET MANAGED SWITCH
or Rapid Spanning Tree (RSTP) Two Flexible Combination Gigabit Ports
Managed
10
Port
Industrial
Ethernet
Switch
Your choice – Just
connect to the RJ45 for a
for fast redundant ring or mesh networks
10
PORT
INDUSTRIAL
ETHERNET
MANAGED
SWITCH
10/100/1000Mbps
auto-detecting
copper
link or plug in
10The
PORT
INDUSTRIAL
ETHERNET
MANAGED
SWITCH
network management
SLX-10MG SNMPv1
is a 10 and
portv2industrial
Ethernet managed
SLX-10MG-1
REAL-TIME SECURE PERFORMANCE
n
n
a fiber transceiver for a 100 or 1000Mbps noise-immune
n SNMPv3 authentication & encryption for security
switch with 7 fast
and 3 Gigabit The
ports
of which two arefiber link. These advanced ports give you the flexibility
SLX-10MG is a 10 port industrial Ethernet managed
n SNMP notifications (traps) for report on event
you need and make your job easier!
combination
ports
that
support
both
copper
and
The SLX-10MG is a 10 port industrialswitch
Ethernet
with 7managed
fast
and fiber
3 Gigabit ports of which two are
n Priority Queuing (QoS/CoS) for real-time operation
optic
connections.
This
switch
is
designed
to
be
rugged,
combination
switch with 7 fast and 3 Gigabit ports
of whichports
two that
are support both copper and fiber
n IGMP for Multicast filtering (snooping & querying)
optic
connections.
This DIN
switch is designed to be rugged,
reliable, real-time
andsupport
secure.both
It combines
compact
combination
ports that
copper
and fiber
n VLAN for convenient traffic
segregation
reliable,
real-time software
and secure. It combines compact DIN
rail
packaging,
protected
circuitry
and
powerful
optic connections.n This switch is designed to be rugged,
Broadcast & multicast storm
protection protected circuitry and powerful software
rail packaging,
to keep
your and
system
going
even keep
under
thesystem
toughest
reliable,
real-time
secure.
It combines
compact
DINgoing even under the toughest
yourdiagnostics
n RMON & port mirroringto
for advanced
rail conditions.
packaging, protected
circuitry
and
powerful
software
conditions.
n Security with HTTPS, SSL, SSH, SNMPv3 & more
to keep
your system
going even under
the CLI
toughest
n Easy configuration via Web,
PRODUCT
Telnet or HIGHLIGHTS
PRODUCT
HIGHLIGHTS
conditions.
n Free field-installable firmware
upgrades
forever
n 10
ports including
n 10 ports including
TROUBLE FREE OPERATION p 7 fast Ethernet 10/100 RJ45 ports
PRODUCT HIGHLIGHTS
p 7 fast Ethernet 10/100 RJ45 ports
n -40 to +75 °C operating range
p 1 Gigabit Ethernet 10/100/1000 RJ45 port
n 10 ports including
n UL/CSA
p 1 Gigabit
(CUL),
CE and Hazloc
(Zone
2) ratedSWITCH
Ethernet
10/100/1000
RJ45
port
10 PORT INDUSTRIAL
ETHERNET
MANAGED
SLX-10MG-1
p
p 7 fast Ethernet
(PENDING)
10/100 RJ45 ports 2 Gigabit combo ports for copper or fiber
p 2 Gigabit combo ports for copper
or
fiber
n High port count in a small footprint
n Dual (redundant) power inputs
p 1PERFORMANCE
Gigabit Ethernet
10/100/1000 RJ45 port
ETHERNET
STANDARDS COMPLIANCE
n Truly rugged design with -40 to 75°C operation
n High port
insurge
a small
footprint
n count
Industrial
and spike
protection
n n Electrical safety – UL508 / CSA C22.2/14; EN61010-1, CE
10 pEthernet
ports
including
3
Gigabit
2 Gigabit combo
ports for coppern or
fiber
n Self-test/alarm output contact
Easy
to
configure management functions
n Truly rugged
design
with -40 to 75°C
operation
n Managed,
n EMC – FCC part 15, ICES-003; EN61000-6-4, EN61000-6-2, CE
store & forward,
wire-speed
n DIN
n High port count
direct footprint
panel mounting
Fast
Redundancy with Rapid Spanning Tree
inrail
a orsmall
REAL-TIME SECURE PERFORMANCE
n All IEEE
n Hazardous locations – UL1604 / CSA C22.2/213 (Class I, Div. 2);
802.3toEthernet
protocols
supported
n Easy
configure
management
functions
or Real-Time-RingTM
Flexible
Combination
Gigabit Ports
n Real-Time-Ring™
or Rapid Spanning
Tree (RSTP)
EN60079-15
(Zone 2, Two
Category
3), CE
(ATEX)
n n
RJ45
ports
1 - 7 (shielded)
Truly
rugged
design10/100BaseTX
with -40 to 75°C
operation
SECURE
PERFORMANCE
Your
choice
– Justperconnect
to the RJ45 for a
n networks
n REAL-TIME
Maritime – designed for
marine
and offshore
ABS
forNETWORKING
fast redundant
ring or mesh
SOLUTIONS
YOUR INDUSTRIAL
CHALLENGES
WWW.SIXNET.COM
RJ45 ports 8 - 10
(shielded)FOR
10/100/1000BaseTX
n Easy to configure management functions
10/100/1000Mbps
auto-detecting
copper link or plug in
n
n RJ45
RoHS
and
WEEE
compliant
port
speed
auto-negotiation
Two
Flexible
Combination
Gigabit
Ports
n Real-Time-Ring™ or Rapid Spanning
n SNMPv1
Tree
and(RSTP)
v2 network management
a company
fiber transceiver for a 100 or 1000Mbps noise-immune
n ISO9001:2000 certified
n RJ45 MDI/MDIX
auto-crossover
REAL-TIME
SECURE
PERFORMANCE
Your
choice
–
Just
connect
to
the
RJ45
for
a
for fast redundant ring or meshn networks
SNMPv3 authentication & encryption for security
fiber link. These advanced ports give you the flexibility
n RJ45 TD and RD auto-polarity
PHYSICAL
copper
linkjoboreasier!
plug in
Two10/100/1000Mbps
Flexible
n Real-Time-Ring™ or Rapid Spanning
Treenotifications
(RSTP) (traps)
n SNMP
for
report onCombination
event auto-detecting
youGigabit
need andPorts
make your
n 9SNMPv1
v2 network
management
n
Ports
and 10 areand
combination
gigabit
ports that have both a RJ45
nchoice
DIN
rail–or direct
panel
mounting
a
fiber
transceiver
for
a
100
or
1000Mbps
noise-immune
Your
Just
connect
to
the
RJ45
for
a
for
fast
redundant
ring
or
mesh
networks
n
Priority
Queuing
(QoS/CoS)
for
real-time
operation
connector
and SFPauthentication
fiber connector. For
each of thesefor
ports,
only one
n SNMPv3
& encryption
security
n Case – Corrosion-resistant aluminum
fiber
link.
These
advanced
ports
give
you
the
flexibility
10/100/1000Mbps
auto-detecting
copper
link
or
plug
in
of
the
connectors
can
be
used
at
a
time.
n IGMP for Multicast filtering (snooping & querying)
n SNMPv1 and v2 network management
n Ingress protection – IP40
n SFPn(pluggable)
SNMP notifications
(traps)
for report
on event
a fiber
for a 100
1000Mbps
ports 9 - 10 accept
mini-GBIC
transceivers
yountransceiver
need and make
yourorjob
easier! noise-immune
n VLAN for convenient traffic segregation
Weight – 0.34 kg (12 oz.)
SNMPv3
n n
Fiber
optic portauthentication
speed: 100 Mbps&orencryption
1000 Mbps for security
fiber
link.
These
advanced
ports
give you the flexibility
n Priority Queuing (QoS/CoS) for
real-time
operation
Dimensions – see mechanical diagram
n
& multicast storm nprotection
n Fiber typical specs (see separate datasheet forBroadcast
n SNMP notifications (traps) for report details)
on event
you
need
and
make
your
job
easier!
n IGMP for
n µm
filtering
(snooping
RMON&&querying)
port mirroring for
advanced diagnostics
p
Multimode,
0.55Multicast
km, 850 nm,
50-62.5/125
MECHANICAL
DRAWING 4.30"
Queuing
(QoS/CoS)
for real-time
operation
np Priority
Singlemode,
10
km,
1310
nm,
9-10/125
µm
n
Security with HTTPS, SSL, SSH, SNMPv3 & more
n VLAN for convenient traffic segregation
[10.92 cm]
np IGMP
Long haul,
up to 120+ km,
1550 (snooping
nm, 9-10/125
for Multicast
filtering
&µm
querying)
n Easy
configuration
via
Web,
Telnet
or
CLI
n Broadcast
& on
multicast
storm protection
n Typical
latency (varies
load & settings)
n Free field-installable firmware upgradesSnaps
to
forever
for convenient
traffic
segregation
np VLAN
@
10
Mbps:
16
us
+
frame
time
n RMON & port mirroring for advanced diagnostics
standard
Removable
TROUBLE
FREE
OPERATION
np Broadcast
@ 100 Mbps:&5multicast
us + framestorm
time protection
DIN Rail
Screw Block
Security
with
HTTPS,
SSL,
SSH,
SNMPv3
&
more
n Full n
n
or half duplex operation configurable per port
-40 to +75 °C operating range
EN50022
n RMON & port mirroring for advanced diagnostics
n MAC
(352)mm)
supported 8192
n addresses
n UL/CSA
Easy configuration
via Web, Telnet
or CLI
(CUL), CE and Hazloc (Zone
rated
n n
Memory
bandwidth
32 Gbps SSL, SSH, SNMPv3
Security
with HTTPS,
&
more
(PENDING)
n Free field-installable firmware upgrades forever
n Ethernet isolation 1500 VRMS 1 minute
5.52"
6.02"
n or
Dual
n Easy configuration via Web, Telnet
CLI(redundant) power inputs
Removable DIN
n TROUBLE
Console ports FREE
– USB and
RS232 (RJ45)
OPERATION
[14.02 cm]
[15.29 cm]
clip for direct
n Industrial surge and spike protection
n Free
field-installable firmware upgrades forever
ETHERNET
COMPLIANCE
panel mounting
n -40 to +75 °C operating range
n Self-test/alarm output contact
n IEEE 802.3z
(Gigabit
1000 Mbps Ethernet connections)
TROUBLE
FREE
OPERATION
n UL/CSA (CUL), CE and Hazloc
n
(Zone
2) rated
rail or direct
panel mounting
Fast Redundancy with Rapid Spanning Tree
n IEEE 802.3u (Fast Ethernet 100Mbps for newerDIN
devices)
n -40 to +75 °C operating range
or Real-Time-RingTM
(PENDING)
Panel mounting ears
n IEEE 802.3
(10Mbps Ethernet supports legacy devices)
accept up to
n n
UL/CSA
(CUL), CE
and
(Zone 2) rated
IEEE
with
Flow Hazloc
Control)
n 802.3x
Dual (Full-Duplex
(redundant)
power
inputs
SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES
WWW.SIXNET.COM
a #12 screw
n IEEE
802.1D/w
(Rapid
Spanning
Tree
for
redundant
rings
and
(PENDING)
n
Industrial
surge
and
spike
protection
Spanning Tree for interoperability)
1.63"
4.69"
Dual
(redundant)
power– inputs
n n
[4.13 cm]
IEEE
(Priority Queuing
CoS, ToS/DS)
n 802.1p
Self-test/alarm
outputQoS,
contact
[11.92 cm]
n n
IEEE
802.1Q (VLAN
traffic
segregation)
Industrial
surgeforand
spike
protection
SeeRedundancy
the User Manual
a More
DetailedTree
Diagram
n DIN rail or direct panel mounting
Fast
withfor
Rapid
Spanning
REAL-TIME-RING™
n Self-test/alarm output contact
TM
All specifications are
subject to change. Consult
factory for latest info.
or
Real-Time-Ring
n Link loss recovery: 30 mS plus 5 mS per hop
n DIN rail or direct panel mounting
ORDERING
GUIDE
Fast Redundancy
with Rapid Spanning Tree
n Switches
in a ring: <50 for best performance
SOLUTIONS
FOR
YOUR
INDUSTRIAL
NETWORKING
CHALLENGES
TM WWW.SIXNET.COM
n Multiple rings supported (configurable)
SLX-10MG-1 or Real-Time-Ring
10 port industrial Ethernet switch
“OK” ALARM OUTPUT
GMFIBER-SFP-500
SOLUTIONS FOR YOUR INDUSTRIAL NETWORKING CHALLENGES
Indicates power & operational status
GMFIBER-SFP-2K
n
n
n
Voltage same as switch input voltage
Maximum current output 0.5 Amp
POWER INPUT
n
n
n
Redundant input terminals
Reverse polarity protection
Gigabit SFPWWW.SIXNET.COM
fiber transceiver, mm, 550 m
Gigabit SFP fiber transceiver, mm, 2 km
GSFIBER-SFP-10K
Gigabit SFP fiber transceiver, sm, 10 km
GSFIBER-SFP-30K
Gigabit SFP fiber transceiver, sm, 30 km
GSFIBER-SFP-50K
Gigabit SFP fiber transceiver, sm, 50 km
n
10 Ethernet ports including 3 Gigabit
safety
– with
UL508
/ CSA
n Electrical
Input power
(typical
all ports
active)C22.2/14; EN61010-1, CE
GSFIB
n EMC – FCC part 15, ICES-003; EN61000-6-4, EN61000-6-2, CE
Managed, store & forward, wire-speed
p 5 W (w/ no fiber plugged in)
n All IEEE 802.3 Ethernet protocols supported
n Hazardous locations – UL1604 / CSA C22.2/213 (Class I, Div. 2);
p 7 W (w/ 2 fiber plugged in)
FMFIB
n RJ45 ports 1 - 7 (shielded) 10/100BaseTX
EN60079-15 (Zone 2, Category 3), CE (ATEX)
n Power input voltage 10-30 VDC
n Maritime – designed for marine and offshore per ABS
n RJ45 ports 8 - 10 (shielded) 10/100/1000BaseTX
FSFIB
n Transient protection 15,000 watts peak
n RoHS
n RJ45 port speed auto-negotiation
and WEEE compliant
n Spike protection 5,000 watts (10x for 10 uS)
FSFIB
n ISO9001:2000
n RJ45 MDI/MDIX auto-crossover
certified company
ETHERNET PERFORMANCE
STANDARDS
COMPLIANCE
ENVIRONMENTAL
n RJ45 TD and RD auto-polarity
PHYSICAL
FSFIB
n 10 Ethernet
n
ports 9including
3 Gigabit
safety temperature:
– UL508
/ CSA C22.2/14; EN61010-1, CE
Ports
and 10 are
combination gigabit ports that have both a RJ45 n Electrical
n DIN
Operating
n
rail or direct
panel mounting
connector
and
SFP
fiber
connector.
For
each
of
these
ports,
only
one
ET-PSn Managed, store & forward, wire-speed
n EMC
FCC
part
EN61000-6-4,
p
–Case
n
-40–to
7515,
°C ICES-003;
(cold startup
at -40 °C) EN61000-6-2, CE
Corrosion-resistant
aluminum
of the
connectors
can besupported
used at a time.
n All IEEE 802.3
n Hazardous
Ethernet
protocols
locations
–
UL1604
/
CSA
C22.2/213
(Class
I,
Div.
2);
n Ingress
n
SP-ETH
– IP40
Storageprotection
temperature
-40 to +85 °C
n SFP (pluggable) ports 9 - 10 accept mini-GBIC transceivers
n RJ45 ports 1
EN60079-15
(Zone
2,
- 7 (shielded) 10/100BaseTX
n
n Weight
– 0.34
kgCategory
(12 oz.) 3),5CE
Humidity
(non-condensing)
to (ATEX)
95% RH (optional conformal coating
n Fiber optic port speed: 100 Mbps or 1000 Mbps
n Maritime
n RJ45 ports 8 - 10 (shielded) 10/100/1000BaseTX
– designed
for mechanical
marine anddiagram
offshore per ABS
n Dimensions
– see
is available)
RJ45-D
n Fiber typical specs (see separate datasheet for details)
n RoHS
n RJ45 port speed auto-negotiation
WEEEand
compliant
n and
Vibration
shock
–
IEC60068-2-6,
-27
p
Multimode, 0.55 km, 850 nm, 50-62.5/125 µm
MECHANICAL
DRAWING
n ISO9001:2000
n RJ45 MDI/MDIX auto-crossover
certified
company
4.30"
NOTE:
n Maximum
Operating
Altitude: 30,000 ft.
p Singlemode, 10 km, 1310 nm, 9-10/125 µm
[10.92 cm]
n RJ45 TD and RD auto-polarity
PHYSICAL
p Long haul, up to 120+ km, 1550 nm, 9-10/125 µm
n ETHERNET
PERFORMANCE
STANDARDS COMPLIANCE
Ports 9 nandTypical
10
arelatency
combination
that have both a RJ45
(varies gigabit
on load ports
& settings)
n DIN rail or direct panel mounting
Snaps to
connector
and
SFP
fiber
connector.
For
each
p
Ethernet
n 10
n –Electrical
@
10ports
Mbps:
16 us + 3
frame
time of these ports, only one
including
Gigabit
safety – aluminum
UL508 / CSA C22.2/14; EN61010-1, CE
n Case
Corrosion-resistant
standard
Removable
of the
connectors
canMbps:
be used
at+aframe
time. time
p @ store
100
5
us
n Managed,
n
& forward, wire-speed
–DIN
FCC
part
15, ICES-003;
EN61000-6-4, EN61000-6-2, CE
n IngressEMC
Rail
protection
–
IP40
Screw Block
n SFP (pluggable)
ports
9
10
accept
mini-GBIC
transceivers
n
Full or
half duplex
operation
configurable
n All IEEE
n Hazardous
802.3
Ethernet
protocols
supportedper port
locations
– UL1604
/ CSA C22.2/213
(Class I, Div.CHALLENGE
2);
n Weight
– 0.34EN50022
kg (12
oz.)YOUR
SOLUTIONS
FOR
INDUSTRIAL
NETWORKING
n Fiber optic
port
speed:
100
Mbps
or
1000
Mbps
n MAC addresses supported 8192
(35 mm)
n RJ45
EN60079-15
(Zone 2, Category
3), CE (ATEX)
ports 1 - 7 (shielded) 10/100BaseTX
n Dimensions
–
see
mechanical
diagram
n Fiber typical
specs (see
separate
datasheet for details)
n
32 Gbps
n Maritime – designed for marine and offshore per ABS
n RJ45Memory
ports 8bandwidth
- 10 (shielded)
10/100/1000BaseTX
p
n Ethernet
Multimode,
0.55 isolation
km, 850 1500
nm, 50-62.5/125
µm
VRMS 1 minute
MECHANICAL
DRAWING
n RoHS
n RJ45 port speed auto-negotiation
andRemovable
WEEE
5.52"
6.02"
4.30" compliant
DIN
p Singlemode,
n Console
10 ports
km, 1310
nm,
9-10/125
µm
– USB
and
RS232 (RJ45)
[14.02
[15.29 cm]
n cm]
n RJ45 MDI/MDIX auto-crossover
ISO9001:2000
certified
[10.92
cm]
clip for
direct company
p Long
haul, upCOMPLIANCE
to 120+ km, 1550 nm, 9-10/125 µm
panel mounting
nETHERNET
RJ45 TD and
RD auto-polarity
PHYSICAL
n
n
SLX-10MG-1 Managed Industrial Ethernet Switch Specifications
10 PORT INDUSTRIAL ETHERNET MANAGED SWITCH
SLX-10MG-1
10 PORT INDUSTRIAL ETHERNET MANAGED SWITCH
SLX-10MG-1
Typical
latency
(varies
on
load &1000
settings)
n IEEE
802.3z
(Gigabit
Mbps
Ethernet
n
Ports
9 and
10 are
combination
gigabit
portsconnections)
that have both a RJ45
Snaps
n DIN
railto
or direct panel mounting
p
@ 10
usSFP
+ (Fast
frame
time
n Mbps:
IEEE16
802.3u
Ethernet
100Mbps
for newer
devices)
connector
and
fiber
connector.
For each
of these
ports, only one
standard
Removable
n
Case
– Corrosion-resistant
aluminum
p
@ 100
Mbps:
5 us +(10Mbps
frame
ears
IEEE
802.3
Ethernet
DIN Rail Panel mounting
ofn the
connectors
can betime
used at supports
a time. legacy devices)
Screw Block
n Ingress protection
accept
up to
– IP40
n Fullnor half
duplex
operation
configurable
per
port
n
EN50022
IEEE
802.3x
(Full-Duplex
with
Flow
Control)
SFP (pluggable) ports 9 - 10 accept mini-GBIC transceivers
a #12
n Weight
– 0.34 kg
(12 screw
oz.)
n MAC
(35 mm)
n IEEE supported
8192
(Rapid
Spanning
Tree
for redundant rings and
n addresses
Fiber
optic 802.1D/w
port speed:
100 Mbps
or 1000
Mbps
n Dimensions – see mechanical diagram
Spanning32
Tree
for interoperability)
n Memory
1.63"
bandwidth
Gbps
n Fiber
typical specs (see separate datasheet for details)
4.69"
n IEEE 802.1p
[4.13 cm]
(Priority1Queuing
– QoS, CoS, ToS/DS)
n Ethernet
15000.55
VRMS
minute
[11.92 cm]
p isolation
Multimode,
km, 850
nm, 50-62.5/125 µm
5.52"MECHANICAL
6.02"
DRAWING
Removable DIN4.30"
n IEEE 802.1Q (VLAN for traffic segregation)
n Console
– USB and
(RJ45)
p ports
[14.02 cm]
[15.29
cm]
Singlemode,
10RS232
km, 1310
nm, 9-10/125 µm
See the
User
Manual
for a More
Detailed
Diagram
clip for
direct
[10.92 cm]
REAL-TIME-RING™
COMPLIANCE
p
ETHERNET
Long haul, up to 120+ km, 1550 nm, 9-10/125 µm
panel mounting
All specifications
are subject to change. Consult factory for latest info.
n Link loss recovery: 30 mS plus 5 mS per hop
n Typical
latency1000
(varies
on load
& settings)
n IEEE
802.3z (Gigabit
Mbps
Ethernet
connections)
ORDERING GUIDE
Snaps to
n Switches in a ring: <50 for best performance
802.3u
p
@ (Fast
10 Mbps:
16 us100Mbps
+ frame time
n IEEE
Ethernet
for newer devices)
standard 10 portRemovable
n Multiple rings supported (configurable)
SLX-10MG-1
p
@
100
Mbps:
5
us
+
frame
time
Panel
ears industrial Ethernet switch
n IEEE 802.3 (10Mbps Ethernet supports legacy devices)
DINmounting
Rail
Screw Block
“OK”
ALARM
OUTPUT
accept upGigabit
to
n Full or half duplex operation configurable per port
EN50022
n IEEE
GMFIBER-SFP-500
SFP fiber transceiver, mm, 550 m
802.3x (Full-Duplex with Flow Control)
a #12
n Indicates
n MAC
(35
mm)screw
power
& operational
status
addresses
supported
8192
n IEEE
802.1D/w
(Rapid
Spanning
Tree
for redundant rings and
GMFIBER-SFP-2K
Gigabit SFP fiber transceiver, mm, 2 km
n Tree
n Memory
Voltage
same as32
switch
bandwidth
Gbpsinput voltage
Spanning
for
interoperability)
1.63"
4.69"
n Maximum
current
output
0.5
Amp
n 802.1p
GSFIBER-SFP-10K
Gigabit SFP fiber transceiver,
sm, cm]
10 km
Ethernet
isolation
1500
VRMS
1
minute
n IEEE
[4.13
(Priority Queuing – QoS, CoS, ToS/DS)
5.52"
6.02"
[11.92
cm]
Removable DIN
nPOWER
INPUT
Console
ports for
– USB
and
RS232 (RJ45)
n IEEE
802.1Q
(VLAN
traffic
segregation)
[14.02
cm]
[15.29
cm]
GSFIBER-SFP-30K
fiber
transceiver,
sm, 30 km
clip forGigabit
direct
See
the User Manual
for aSFP
More
Detailed
Diagram
n Redundant
input terminals
ETHERNET
COMPLIANCE
REAL-TIME-RING™
panel mounting
All
specifications
are
subject
to
change.
Consult
factory
for
latest
info.
GSFIBER-SFP-50K Gigabit SFP fiber transceiver, sm, 50
km
n Reverse polarity protection
IEEE
802.3z30
(Gigabit
1000
Mbps
connections)
n Linkn loss
recovery:
mS plus
5 mS
per Ethernet
hop
n Input power (typical with all ports active)
ORDERING
GUIDE
n IEEE
GSFIBER-SFP-80K
Gigabit
SFP
fiber
transceiver,
sm,
80
km
802.3u
(Fast
Ethernet
100Mbps
for
newer
devices)
n Switches
<50 for best performance
in pa ring:
5 W (w/ no fiber plugged in)
Panel
mounting
ears Ethernet switch
n IEEE
802.3
(10Mbps
Ethernet
supports
legacy
devices)
n Multiple
rings
supported
(configurable)
SLX-10MG-1
10
port
industrial
p 7 W (w/ 2 fiber plugged in)
FMFIBER-SFP-4K accept
100Mb
upSFP
to fiber transceiver, mm, 4 km
n
802.3x (Full-Duplex with Flow Control)
“OK” ALARM IEEE
OUTPUT
n Power input voltage 10-30 VDC
a #12SFP
screw
GMFIBER-SFP-500
Gigabit
fiberfiber
transceiver,
mm,
m
n IEEE 802.1D/w (Rapid Spanning Tree for redundant rings and
FSFIBER-SFP-30K
100Mb
SFP
transceiver,
sm,550
30 km
Transient
protection 15,000
n Indicatesn power
&Tree
operational
statuswatts peak
Spanning
for
interoperability)
1.63"
GMFIBER-SFP-2K
Gigabit
SFP
fiber
transceiver,
mm,
2
km
n Spike protection 5,000 watts (10x for 10 uS)
FSFIBER-SFP-60K 4.69"
100Mb SFP fiber transceiver, sm, 60 km
n Voltage same
as switch
inputQueuing
voltage – QoS, CoS, ToS/DS)
n IEEE 802.1p
[4.13 cm]
(Priority
[11.92
cm]
ENVIRONMENTAL
n Maximum current output 0.5 Amp
GSFIBER-SFP-10K
Gigabit
SFPSFP
fiberfiber
transceiver,
sm,
10100
km km
n IEEE 802.1Q (VLAN for traffic segregation)
FSFIBER-SFP-100
100Mb
transceiver,
sm,
n Operating temperature:
See the User Manual for a More Detailed Diagram
POWER
INPUT
REAL-TIME-RING™
ET-PS-024-02
Power
–transceiver,
AC to 24VDC,sm,
2A 30 km
GSFIBER-SFP-30K
SFPsupply
p -40 to 75 °C (cold startup at -40 °C)
All specificationsGigabit
are subject
tofiber
change.
Consult factory
for latest info.
n Redundant input terminals
n Link
n Storage
SP-ETH-2
Dual port Ethernet surge & lightning protector
loss recovery:
30 mS
plus
5 mS
temperature
-40
to +85
°Cper hop
GSFIBER-SFP-50K
Gigabit
SFP
fiber
transceiver,
sm,
50
km
n Reverse polarity protection
ORDERING
GUIDE
for the 10/100 ports only
n Humidity
n Switches
to 95% RH (optional conformal coating
in a(non-condensing)
ring: <50 for best5performance
n Input power is
(typical
with
all
ports
active)
available)
n Multiple rings supported (configurable)
SLX-10MG-1 Gigabit
10
port
industrial
Ethernet
RJ45-DB9F-CBL
Console
port
cable,
DB9
to RJ45
GSFIBER-SFP-80K
SFP
fiber
transceiver,
sm,switch
80 km
p 5 W n(w/ Vibration
no fiber plugged
in) – IEC60068-2-6, -27
and shock
“OK” ALARM OUTPUT
GMFIBER-SFP-500
Gigabit
SFPtransceiver,
fiber
transceiver,
550 m
p 7 W n(w/ Maximum
NOTE:
Contact SIXNET
for special
long
haul
transceivers
up to
120 Km.
FMFIBER-SFP-4K
100Mb
SFPorfiber
mm,
4 mm,
km
2 fiber plugged
in) Altitude: 30,000 ft.
Operating
n Indicates power & operational status
n Power
input voltage 10-30 VDC
GMFIBER-SFP-2K
Gigabit
SFP
fiber
transceiver,
mm,
FSFIBER-SFP-30K 100Mb SFP fiber transceiver, sm, 30 km 2 km
n Voltage same as switch input voltage
n Transient
protection 15,000 watts peak
n Maximum current output 0.5 Amp
n Spike
GSFIBER-SFP-10K
SFPtransceiver,
fiber transceiver,
protection 5,000 watts (10x for 10 uS)
Datasheet
SLX-10MG-1
FSFIBER-SFP-60K
100MbGigabit
SFP fiber
sm,
60sm,
km 10 km
n
Rev JUN2011
POWER INPUT
ENVIRONMENTAL
GSFIBER-SFP-30K
SFPtransceiver,
fiber transceiver,
sm,
FSFIBER-SFP-100
100MbGigabit
SFP fiber
sm, 100
km30 km
SOLUTIONS
FOR
YOUR
INDUSTRIAL
NETWORKING
CHALLENGES
WWW.SIXNET.COM
n Redundant input terminals
n Operating
temperature:
GSFIBER-SFP-50K
transceiver,
sm, 50 km
ET-PS-024-02
PowerGigabit
supply –SFP
AC tofiber
24VDC,
2A
n Reverse polarity protection
p -40
to 75 °C (cold startup at -40 °C)
n Input power (typical with all ports active)
n Storage
SP-ETH-2
Dual
port
Ethernet
surge
&
lightning
protector
temperature -40 to +85 °C
GSFIBER-SFP-80K Gigabit SFP fiber transceiver, sm, 80 km
p (non-condensing)
5 W (w/ no fiber plugged
in) RH (optional conformal coating
for the 10/100 ports only
n Humidity
5 to 95%
p 7 W (w/ 2 fiber plugged in)
FMFIBER-SFP-4K
100Mb
SFP DB9
fibertotransceiver,
mm, 4 km
is available)
RJ45-DB9F-CBL
Console
port cable,
RJ45
n Power
10-30 VDC -27
n Vibration
and input
shockvoltage
– IEC60068-2-6,
FSFIBER-SFP-30K 100Mb SFP fiber transceiver, sm, 30 km
n Transient
NOTE: Contact SIXNET for special or long haul transceivers up to 120 Km.
protection
15,000
wattsft.peak
n Maximum
Operating
Altitude:
30,000
Americas
As the global experts in communication, monitoring and control for
n Spike protection 5,000 watts (10x for 10 uS)
FSFIBER-SFP-60K 100Mb SFP fiber transceiver, sm, 60 km
industrial automation and networking, Red Lion has been delivering
innovative
solutions for over100Mb
forty years.
Ourtransceiver,
automation,sm,
Ethernet
FSFIBER-SFP-100
SFP fiber
100 kmand
Datasheet to
SLX-10MG-1
cellular M2M technology enables companies worldwide
gain real-time
Rev
JUN2011
Power supply – AC to 24VDC, 2A
dataET-PS-024-02
visibility that drives productivity.
Product brands include Red Lion,
n Storage
SP-ETH-2
Dual port Ethernet
surge
& lightning
protector
SOLUTIONS
FOR
YOUR INDUSTRIAL
NETWORKING CHALLENGES
WWW.SIXNET.COM
temperature
-40 to +85 °C Europe
N-Tron
and Sixnet. With headquarters
in York,
Pennsylvania,
the
company
for the Asia-Pacific
10/100 ports only
n Humidity (non-condensing) 5 to 95% RH (optional conformal coating has offices across the Americas,
and Europe. Red Lion is
Middle East
is available)
part RJ45-DB9F-CBL
of Spectris plc, the productivity-enhancing
and
Console port cable, DB9 toinstrumentation
RJ45
Africa
-27
w w wn . rVibration
e d l i oand
n .shock
n e t– IEC60068-2-6,[email protected]
controls company. For more information, please visit www.redlion.net.
ENVIRONMENTAL
[email protected]
Asia-Pacific
n Operating temperature:
[email protected]
p -40 to 75 °C (cold startup at -40 °C)
n
Maximum Operating Altitude: 30,000 ft.
Connect. Monitor. Control.
+1 (717) 767-6511
NOTE: Contact SIXNET for special or long haul transceivers up to 120 Km.
ADLD0205 041615 ©2015 Red Lion Controls, Inc. All rights reserved. Red Lion, the Red Lion logo, N-Tron and Sixnet are
registered trademarks of Red Lion Controls, Inc. All other company and product names are trademarks of their respective owners.
Datasheet SLX-10MG-1