Download Band Scanner Pro User Manual

65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: [email protected] ,Web: www.devabroadcast.com
Using the Band Scanner Software
After connecting the Band Scanner Pro to the USB port of any Windows® based PC, it is ready
for use and any additional adjustments or settings are not required. In case you would like to
measure the band off-air, please connect any external FM antenna to the Antenna In. If any MPX
or RDS signal must be analyzed, apply the signal to the MPX/RDS Input.
NOTE: The maximum input RF signal to the Antenna Input is 100 dBµV. Do not connect the
Band Scanner Pro directly to any FM Transmitter’s MONITOR Output
After the initial software installation, the following shortcut of the software will be located on
the desktop.
You can launch the program using this shortcut or using Start >Programs > Band Scanner
If the device is not detected the application software will look like this:
Some of the buttons and functions will be disabled. The USB connectivity indicator will be
colored in red.
- 26 -