Download Platform Notes: SPARCstation Voyager Software Guide

2
How To Turn the Power Back On
Note – If you are powering on your system for the first time, follow the
instructions in How to Turn the Power On on page 2.
1. Turn on the power for any external devices.
2. Press the power key on the keyboard.
If you used any of the Suspend methods to turn the system off, your system
will Resume with the Lockscreen utility. After you type your password, the
system will Resume at the point that you left it.
If you halted the system, it will boot.
Troubleshooting
What To Do if Power-On Does Not Succeed
If you do not see the banner screen within 10 to 15 seconds after you turn on
the power:
1. Check the power LED at the front of the system to see if it is lit.
2. Make sure the AC power cord is securely attached to both the power
supply and the AC wall outlet.
3. Be sure the AC wall outlet has power.
4. Check to see that the keyboard cables are firmly connected.
5. Try pressing the power key again.
You should hear a beep as the machine comes on.
6. If the machine does not come on, try pressing the power switch on the
system’s rear panel.
See Figure 2-3 on page 20
Turning the System Power On and Off
19