Download - Service, Support

Backlight brightness control
Pressing <CTRL> and the cursor keys sets the screen backlight brightness by an increment of 10%
(brightness range: 10% to 100%).
Note that after you release the key combination, the HMI saves your brightness settings and the
brightness bar disappears after three seconds.
2.2
Machine control panels
2.2.1
Machine Control Panel (MCP) versions
MCP version
•
•
•
•
•
•
Horizontal MCP, English version
SINUMERIK 808D ADVANCED T (Turning)/M
(Milling)
Horizontal MCP, Chinese version
Vertical MCP with a reserved slot for the handwheel, English version
Vertical MCP with a reserved slot for the handwheel, Chinese version
Vertical MCP with an override switch for the spindle, English version
Vertical MCP with an override switch for the spindle, Chinese version
2.2.2
①
②
10
Applicable control system
Control elements on the MCP
Reserved hole for emergency stop button
Handwheel key
Controls the axis movement with external handwheels
⑦
⑧
Axis traversing keys
Spindle override switch
(unavailable for the vertical MCP with a reserved slot
for the handwheel)
Programming and Operating Manual (Turning)
6FC5398-5DP10-0BA3, 08/2015