Download - Service, Support

Backs up the files onto an external PC. This requires a connected network drive on the
control system. For more information, see section "Configuring the network drive
(Page 45)".
Backs up the files in the folder for storing the manufacturer files on the control system. This
folder is visible with the manufacturer password.
Backs up the files in the folder for storing end user files on the control system.
6.
Press this softkey to paste the copied data into the current directory.
Backing up files via RS232 interface
The program files can be backed up onto an external PC via the RS232 interface.
Operating sequence
1.
Connect the control system with the PC using an RS232 cable.
2.
Configure the communication settings for the RS232 interface (see Section "Configuring
RS232 communication (Page 42)").
3.
Press this button on the main screen of SinuComPCIN and input the name for the text file,
for example, Test.txt.
4.
Select the desired operating area on the PPU.
5.
Enter the program directory.
6.
Select the program file you desire to back up.
7.
Press this softkey to copy it to the clipboard.
8.
Enter the RS232 directory.
9.
Press this vertical softkey in the RS232 window. The file transferring starts.
10.
Wait until SinuComPCIN finishes data transfer, and click this button.
For more information about data backup, refer to the SINUMERIK 808D ADVANCED Diagnostics Manual.
Programming and Operating Manual (Turning)
6FC5398-5DP10-0BA3, 08/2015
53