Download EX2500A - VTI Instruments

www.vtiinstruments.com
As long as the signal source frequency does not exceed the destination’s maximum frequency, any
source can be routed to any destination.
FIGURE 5-18: TRIGGER CONFIGURATION PAGE – LAN EVENT TRIGGER CONTROLS
•
LAN Event Trigger: LAN Event triggers can be sourced from any of the eight TTL triggers
on the backplane as well as from software commands. The trigger may be routed to any
hardware trigger. LAN Event triggers are rate-limited to 1 ms (1 kHz) and are only generated
by falling TTL edges.
o Destination: the destination trigger to which the Source is routed.
o Source: the external trigger which is routed to the Destination.
o Destination Path: specifies the network host names to which LAN Events will be routed.
The format of this field should be a comma-separated list of “hostname:port”. The default
is to send multicast UDP packets on the default LAN Event. See LAN Event Trigger
Controls for more information.
o Output: enables the sending of messages. If the destination path contains any TCP
destinations, they are connected after Enable is selected and Submit is clicked. TCP
connection are closed once Enable is de-selected and Submit is clicked.
EX2500A Web Page Operation
69