Download User`s Manual
Transcript
backlight is set for AUTO. The backlight also lights immediately upon power up serving as a power indicator. Pressing the CTRL key jumps to the next menu. Entr Detail Menu Display This display allows user to enter the sub-menu where the TX Channel Mode, TX HD Enc Setup and TX LCD Backlight displays are accessed. Pressing the CTRL key jumps to the TX Audio Enable display which is on the main menu. Pressing the ENTR key jumps to the sub-menu TX Channel Mode display. Exit Detail Menu Display This display allows user to exit the sub-menu and return to the main menu where the TX RF Frequency Display, and the TX Audio displays are accessed. Pressing the CTRL key jumps back to the TX Channel Mode display. Pressing the ENTR key jumps to the main menu TX RF Frequency Display. 5.1.1.9 Power Switch The power switch is a three-position switch. In the down position power is sourced from a battery (IDX or AB). In the up position external power is provided through the DB-15 connector, J5, pins 13 (GND), 14 and 15 (+12Vdc). When the power switch is in the center position the CMT is off. See figure 3. The backlight of the LCD serves as a power indicator and lights immediately upon power up. LCD Display & Control Power Switch Figure 3– LCD Display & Control 100-M0071X2B 18 of 42 www.cobham.com/gms