Download User`s Manual

Transcript
backlight is set for AUTO. The backlight also lights immediately upon power up serving as
a power indicator.
Pressing the CTRL key jumps to the next menu.
Entr Detail Menu Display
This display allows user to enter the sub-menu where the TX Channel Mode, TX HD Enc
Setup and TX LCD Backlight displays are accessed. Pressing the CTRL key jumps to the TX
Audio Enable display which is on the main menu. Pressing the ENTR key jumps to the
sub-menu TX Channel Mode display.
Exit Detail Menu Display
This display allows user to exit the sub-menu and return to the main menu where the TX
RF Frequency Display, and the TX Audio displays are accessed. Pressing the CTRL key
jumps back to the TX Channel Mode display. Pressing the ENTR key jumps to the main
menu TX RF Frequency Display.
5.1.1.9
Power Switch
The power switch is a three-position switch. In the down position power is sourced from
a battery (IDX or AB). In the up position external power is provided through the DB-15
connector, J5, pins 13 (GND), 14 and 15 (+12Vdc). When the power switch is in the
center position the CMT is off. See figure 3. The backlight of the LCD serves as a power
indicator and lights immediately upon power up.
LCD Display & Control
Power Switch
Figure 3– LCD Display & Control
100-M0071X2B
18 of 42
www.cobham.com/gms