Download User`s Manual

Transcript
Power
Switch for
RF Input
BNC connector – IF frequency
output
DB-9 connector for local
power
Figure 13 - BDC Connectors
Table 3 - DB-9 Connector Pin Out for the D/C
Pin
Signal
1
+12Vdc
3
2, 4-9
100-M0071X2B
GND
NC
Notes
Power supply must be able to source at least
500mA. Voltage should not drop below +10Vdc.
Power ground
Not Connected
39 of 42
www.cobham.com/gms