Download Creatr HS Manual

Transcript
Printing with dual extrusion: allocating the right process to the correct extruder .
Printing with dual extrusion: allocating the right process to the correct extruder .
The key to printing in two different colours is that you need two different STL files; one for each
color. So in your CAD program, you have to save your file in two parts (you will get two stl files). In
Simplify3d, you can place both stl files over each other to create one object again.
You will also have to make two different slicing processes; one process with the right extruder and
one with the left.
STEP 1: click ‘add process’ and select a process for ‘Dual Support’, with your desired material and
detail properties (fast, medium, or detailed). This loads the profile in which the right extruder is
primary and the left extruder prints support.
STEP 2: Double-click on the process and click on the ‘select models’ tab. Select the models that you
want to be printed by the right extruder.
Creating your own printable file: from STL to gcode
17