Download User`s Manual

Chapter 6 Description of Function Parameters
6.1.6 F5 Series Analog Input/Output Parameters(Continuation...)
Function
Code
F5.15
F5.16
Name
Combined
feeding
path setting
Combined
feeding
algorithm
setting
Setting Range
LED units digit Operation
figure
0: Keyboard potentiometer
1: Digital setting 1
2: Remain
3: COM setting
4: AVI
5: ACI
6: Terminal impulse
LED tens digit Operation
figure: 2
0: Keyboard potentiometer
1: Digital setting 1
2: Remain
3: COM setting
4: AVI
5: ACI
6: Terminal impulse
LED hundreds digit:Operation
figure: 3
0: Keyboard potentiometer
1: Digital setting 1
2: Remain
3: COM setting
4: AVI
5: ACI
6: Terminal impulse
LED thousands digit:Remain
LED units digit algorithm 1
0: Addition
1: Subtraction
2: Absolute value (subtraction)
3: Take the maximal value
4: Take the minimum value
LED tens digit Algorithm 2
-50-
Unit
Min. Default Operation
Unit Setting Modification
Chapter 6 Description of Function Parameters
6.1.6 F5 Series Analog Input/Output Parameters(Continuation...)
Function
Code
Name
Combined
feeding
F5.16 algorithm
setting
1
000
00
Unit
0: Addition
1: Subtraction
2: Absolute value (subtraction)
3: Take the maximal value
4: Take the minimum value
5: Operating figure 3 does not
participate in algorithm.
LED thousands digit Remain
LED thousands digit Remain
Note: The above two parameters
are valid only when F0.01=7.
Min. Default Operation
Unit Setting Modification
1
000
6.1.7 F6 Series PID Function Parameters
Function
Code
1
Setting Range
Name
Setting Range
PID action
F6.00 setting
LED units digit: Function
setting
0: Close 1: Open
LED tens digit: PID input
selection
0: Auto input
1: Input through defined multifunction terminals
LED hundreds digit: Remain
LED thousands digit: Remain
PID given path
F6.01 setting
0: Keyboard potentiometer
1: Digital setting
2: Remain
3: Remain
4: AVI
5: ACI
-51-
Unit
Min. Default Operation
Unit Setting Modification
1
00
1
1