Download User Manual - Projector Central
Transcript
Digital Projection HIGHlite Cine 260, 1080p 330 User Manual Examples of 4:3 images displayed with different aspect ratio settings 4:3 Native 2. Installation Notes The 4:3 image shown here has far fewer pixels than the 1920 x 1080 of the DMD. Your image may be different. The 4:3 setting is best, unless there is some specific reason for wanting the smaller Native image, for instance, to maintain the same scale as other images from the same source. If you are using an anamorphic lens, the 4:3 Narrow setting should be used. The lens will stretch the image to the correct width. If you are using an anamorphic lens, you will need to use the 4:3 Narrow setting to correct the image. 4:3 Narrow without anamorphic lens 4:3 Narrow with anamorphic lens Examples of 2.35:1 images displayed with different aspect ratio settings The 2.35 image shown here has far fewer pixels than the 1920 x 1080 of the DMD. Your image may be different. 16:9 Native The 16:9 setting is best, unless there is some specific reason for wanting the smaller Native image, for instance, to maintain the same scale as other images from the same source. If you have an anamorphic lens, the Theaterscope setting would be a much better option. Because it uses the whole of the DMD, it will be a much brighter image than the letterboxed options shown above, and will fill a wider screen if this is available. To take advantage of the Theaterscope setting, you MUST have an anamorphic lens. Theaterscope without Anamorphic lens Rev B July 2011 with Anamorphic lens, stretched to fill wider screen Page 2.3