Download USER MANUAL

User guide
7. PARAMETERS SETTING
7.1. PRESSURE UNIT
This parameter allows the operator to choose the pressure unit displayed by the
instrument.
You have a choice among kPa/°C or PSI/°F.
From the main menu, access to the settings menu
key.
by pressing the
MAIN MENU
VEHICLE SELECTION
RKE TEST
>SETTINGS
SETTINGS
>UNITS : kPa/°C
BUZZER ON: YES
BACK LIGHT: 100 %
Select UNITS menu and confirm with the
key.
Mocve the cursor in front of the unit to use by using
the up and down arrows
with
and confirm
Key.
SETTINGS
>UNITS : PSI/°F
BUZZER ON: YES
BACK LIGHT: 100 %
The new units are selected.
Return to the main menu by pressing the
UM-28500B-U
UNITS SELECTION
kPa/°C
>PSI/°F
key.
MAIN MENU
VEHICLE SELECTION
RKE TEST
>SETTINGS
User manual ATEQ VT55 Page 13/34