1
Download Smart Objects Integration Kit User Guide
Transcript
3 Getting Started The Edge router and the NAMT PC can connect either direct trough a cross-over cable (not recommended, will generate drawbacks: most notably slow boot up and incorrect data timestamp), or using an Ethernet switch (recommended). Recommended setup use a switch, which also connect the kit to the Internet: Figure 3.1 See the Quick Start Guide for the default Edge Router IPv4 and other network configurations necessary. Alternate setup does not need a switch. This setup is possible but not recommended, as in this setup the time cannot be synchronized with Internet time servers therefore the communication timestamps will be incorrect. Figure 3.2 Steps to a functional kit: _____________________________________________________________________________________ Smart Object Development Kit User Guide Page 16 of 44
