Download Seagate Crystal Reports

7272
3. Highlight this setting with the small down arrow on the right side of the LCD.
4. Press the Change Setting Contents button on the LCD. Ensure that the setting now indicates No Mask. Press the Return button to exit the Key Operator
mode.
Solution ID
TAUS0626842EN*
Solution Usage
0
Description
On a machine equipped with an external key counter device, print jobs do not increment the counter, but copy jobs will increment the counter.
Solution
CAUSE: A software dipswitch needs to be changed.
SOLUTION: Access 25 mode then select software dipswitches. Scroll to software dipswitch 16-3 and set to ON (1). This will allow print jobs to increment the
external device.
Solution ID
TAUS0626940EN*
Solution Usage
0
Solution Usage
0
Solution Usage
0
Solution Usage
0
Solution Usage
0
Description
What is the maximum number of files that can be stored in one box when utilizing the scanning to hard drive feature?
Solution
The maximum number of PDF formatted files is 500 and the maximum TIFF formatted files is 250 files.
Solution ID
TAUS0627162EN*
Description
PageScope Address Book utility released.
Solution
See the Modification Notice for details.
Note: To view the PDF, Acrobat* Reader must be installed. Acrobat Reader can be downloaded for free from the Adobe* Web site at:
[[http://www.adobe.com/products/acrobat/readstep2.html| URL http://www.adobe.com/products/acrobat/readstep2.html]]
* Trademark ownership information
Solution ID
TAUS0627206EN*
Description
Where to get the PageScope Address Book utility.
Solution
The PageScope Address Book utility can be downloaded from the [[Konica Minolta PageScope web site| URL
https://marbt.konicaminolta.jp/crm/pssignup.nsf/NewSignupUS]].
Solution ID
TAUS0627214EN*
Description
PageScope Address Book utility User Manual.
Solution
PageScope Address Book utility User Manual .
Note: To view the PDF, Acrobat* Reader must be installed. Acrobat Reader can be downloaded for free from the Adobe* Web site at:
[[http://www.adobe.com/products/acrobat/readstep2.html| URL http://www.adobe.com/products/acrobat/readstep2.html]]
* Trademark ownership information
Solution ID
TAUS0627454EN*
Description
J17-01 only when duplexing.
Solution
CAUSE: A dirty or defective ADU deceleration clutch (MC2) causing the paper not to reach the ADU pre-registration rollers.
SOLUTION: To verify clutch operation, switch the clutch with the ADU conveyance clutch (MC13). If the jam symptoms change or cease, MC2 is defective
or contaminated. If cleaning does not resolve, replace MC2 (p/n 56AA82010).
Copyright 2009, Konica Minolta Business Solutions U.S.A., Inc.
June 2009
80