Download GA10 Data Logging Software User`s Manual
Transcript
Chapter 7 OPC-UA Server Function (/UA option) 1 7.2.2 Project Tab An OPC-UA server project consists of a setting page and status page. Depending on the privileges of the user who opened the project and the lock status, if the setting page is enabled, the setting page appears. Otherwise the status page appears. The following figure shows the OPC-UA server project tab. Unlike normal projects, the record button and buttons for displaying the Monitor Page and Data files Page are not available. 7.2.3 Setting Pages An OPC-UA server project consists of Device, Tag, Math Tag, Server Operation, and Access&Others Setting Pages. Device, Tag, Math Tag, and Access&Others are the same functions as those of typical projects. There is no Simple Settings mode. Math Tag appears when the Math function (/MT option) is installed. 2 3 4 Project icon and project name Status indication (monitoring) 5 6 7 OPC-UA Server Function (/UA option) Start monitoring 8 Stop monitoring 9 Setting Page Status Page 10 11 Item Name Status indication Description Indicates the project status. The behavior is the same as that for typical projects. Icon OPC-UA server icon Project name OPC-UA Start Monitoring A button for starting or stopping button monitoring. The behavior is the same as that for typical projects. If monitoring starts, the Status Page will appear. Clicking the Start Monitoring button starts the OPC-UA server. If the server fails to start, error message E3069 will appear. Then, a consistency check is performed between the server certificate and private key. If the check fails, error message E3070 will appear. Setting Page A button for calling up the project button setting window. The behavior is the same as that for typical projects. Status Page button Condition None None None Disabled in a locked state. Disabled for monitor users. Disabled in a locked state. Disabled for monitor users. A button for calling up the Status Page. None The behavior is the same as that for typical projects. 12 App Depending on the access privileges of the user when the project is opened and the project status, each of the displayed setting pages may be enabled or disabled. (See the table below.) Running State Not Device monitoring Tag Math Tag Server Operation Access&Others Monitoring Device Tag Math Tag Server Operation Access&Others 1 2 3 IM 04L65B01-01EN Setting Page Access Privileges When the Project Is Opened Owner Manager Operator Enabled Enabled Enabled2 Enabled Enabled Disabled Enabled Enabled Disabled Enabled Enabled Disabled Enabled Enabled2 Disabled Disabled Disabled Enabled1 Enabled2 Disabled Disabled Disabled Disabled Enabled2 Disabled Disabled Disabled Enabled3 Disabled Disabled Only Keep Lock State and DDE Server in the page are enabled. All others are disabled. Devices List in the page is disabled. All others are enabled. Keep Lock State and DDE Server are enabled. All others are enabled. 7-5 Index