Download 4Motion Device Driver Ver.3.0.10 User Manual

Chapter 4 - The Template Manager
ASN-GW Template
Parameter
Description
Interim Interval (Min)
Not applicable if Accounting Mode (see above) is set to None. The default
interval in seconds for Accounting Interim reports to be used if
Acct-Interim-Interval is not received from the AAA server.
Value “0” means interim reports are deactivated unless Acct-Interim-Interval is
sent by the AAA server in Access Accept messages.
The valid range is 0 (none) or 5-1600 (minutes). The default is 0 ((the default in
the device is 5).).
Vid Map Start and Vid Map
End
Applicable only for VPWS-Mapped Service Groups.
The start and end value of the range of VLAN IDs for mapping. End value cannot
be lower than Start value. The range for both is from 1 to 4094. The default for
Vid Map Start is 0, which is not a valid value. The default for Vid Map End is 1.
None of the value within the range shall overlap with any existing infrastructure
(host interfaces) VLAN IDs. None of the value within the range shall overlap with
VID mapping ranges of other existing Service Groups.
Primary DNS Server
Applicable only for IP Service Groups in Proxy mode. IP Address of the first DNS
Server to be provisioned to MS from this Group. In the Proxy mode, this value is
used if appropriate parameter is not received in RADIUS Access-Accept.
The default is 0.0.0.0.
Secondary DNS Server
Applicable only for IP Service Groups in Proxy mode. IP Address of the second
DNS Server to be provisioned to MS from this Group. In the Proxy mode, this
value is used if appropriate parameter is not received in RADIUS Access-Accept.
The default is 0.0.0.0.
Renewal Time (% of Lease
Time)
Applicable only for IP Service Groups in Proxy mode. The interval, as a
percentage of the Lease Time, after which the MS can request renewal of a lease
that has expired. This value is used if appropriate parameter is not received in
RADIUS Access-Accept
The renewal Time must be lower than rebind Time. The range is from 1 to 100
(%). The default is 1% (the default in the device is 50%).
Rebind Time (% of Lease
Time)
Applicable only for IP Service Groups in Proxy mode. The rebind interval, as a
percentage of the Lease Time. This is passed to the MS (DHCP client). The
range is from 1 to 99. This value is used if appropriate parameter is not received
in RADIUS Access-Accept.
The range is from 1 to 99 (%). The default is 1% (the default in the device is
75%).
4Motion BTS and Mini-Centralized ASN-GW
37
Device Driver User Manual