Download 3D Static Strength Prediction Program Version 5.0.4 User`s Manual

Page 76
3D Static Strength Prediction Program Version 5.0
Strengths: Device and Measurement. J Biomechanics, 1988; 21(1):35-44.
Mayer, et al., Quantification of Lumbar Function:
Part 2 and Part 3. Spine, 1985; 10(8):765-772
and 10(10):912-920.
McGill, S. M. and Norman, R. W., Partitioning of
the L4/L5 dynamic moment into disc, ligamentous, and muscular components during lifting.
Spine, 1986; 11: 666-78.
McGill, S. M. and Norman, R. W., Effects of an
anatomically detailed erector spinae model of
L4/L5 disc compression and shear.
J
Biomech, 1987; 20: 591-600.
McGill, S. M., Patt, N., Norman, R. W., Measurement of the trunk musculature of active males
using CT scan radiography: implications for
force and moment generating capacity about the
L4/L5 joint. J Biomech, 1988; 21: 329-41.
Shanne, T. A., A Three-Dimensional Hand Force
Capability Model for the Seated Operator, Unpublished Ph.D. Thesis (Industrial Engineering),
University of Michigan, Ann Arbor, 1972.
Smith and Mayer, Quantification of Lumbar Function: Part 1. Spine, 1985; 10(8):757-764.
Stobbe, T., The Development of a Practical
Strength Testing Program for Industry, Unpublished Ph.D. Thesis (Industrial
Engineering), University of Michigan, Ann Arbor, 1980.
Tracy, et.al., The geometry of the muscles of the
lumbar spine determined by magnetic resonance
imaging. Spine, 1989; 14: 186-93.
Waters, T. R., Putz-Anderson, V., Garg, A., and
Fine, L. J., Revised NIOSH Equation for the
Design and Evaluation of Manual Lifting Tasks.
Ergonomics, 1993; 36 (7): 749 -776.
National Institute for Occupational Safety and
Health, Work Practices Guide for Manual Lifting, Technical Report No. 81-122, U.S. Dept. of
Health and Human Services (NIOSH), Cincinnati, Ohio, 1981.
Nemeth, G. and Ohlsen, H., Moment arm lengths of
trunk muscles to the lumbosacral joint obtained
in vivo with computed tomography. Spine,
1986; 11: 158-60.
Parkinson, M.B., Chaffin, D.B., and Reed, M.P.,
Center of pressure excursion capability in performance of seated lateral-reaching tasks. Submitted for publication in Clinical Biomechanics
Reid, J. G., Costigan, P. A., and Comrie, W., Prediction of trunk muscle areas and moment arms
by use of anthropometric measures. Spine,
1987; 12: 273-5.
Rohmert, W., Problems of determination of rest
allowances, Part 2: Determining rest allowances
in different human tasks. Applied Ergonomics,
1973, 4:158-162.
Copyright 2005: The Regents of The University of Michigan, ALL RIGHTS RESERVED