Download Dear MyChron 3 Owner

The parameters you can set in CONFIGURATION MODE are explained in the
same order they appear by pressing MENU/<<.
Night Vision
The MyChron 3 display can be set to backlight display so that it
is visible during night racing.
To set the Night Vision ON or OFF, press MEM/OK until the
required selection appears. To return to main display mode
press VIEW.
When the Night Vision option is activated a light globe will be
displayed in the display’s top right corner.
To activate Night Vision mode during a test, simply press
MENU/<<.
Clear test
The “Clear test data” option clears the data stored in the
data
system’s memory.
To run this function, after having entered the CONFIGURATION
MODE, push MENU/<< until you see:
CLEAR TEST DATA
Then press MEM twice to erase data or press VIEW to quit.
This function sets the beacon obscuring time. This parameter is
Beacon
obscuring
time
important when more than one lap beacon/transmitter is
operating, in order to avoid false lap times, or in case of multiple
magnetic strips on the track ( if magnetic receiver is employed
and you don’t want to see split times). For example, if your Lap
24