Download Ground Loop DesignTM

CHAPTER 5: The Horizontal Design Module
Printing Reports
Reports of the active project can be printed at any time from the Design Studio
using the toolbar print button or from the File menu Print.
The information printed includes all of the input parameters from the design
module, along with the associated results. The zone and loads information is not
included with the report, and must be printed separately from the Loads panel.
The filename of the *.zon file associated with the project report is also listed on
the report.
Two different project reports are available: concise and detailed. The concise
form includes all of the design parameters, but omits some of the project
information and comments. The detailed version includes the project information
and comments.
More information on reports can be found in Chapter 7.
References
Francis, E., Editor. Refrigeration and Air Conditioning, 3rd Edition. Air-Conditioning
and Refrigeration Institute. p.186. Prentice Hall, New Jersey, 1997.
Incropera, F. and Dewitt, D. Introduction to Heat Transfer, 2nd Edition. p. 456, p. 98.
John Wiley and Sons, New York. 1990.
Paul, N. The Effect of Grout Thermal Conductivity on Vertical Geothermal Heat
Exchanger Design and Performance.
129