Download MVME147BUG 147Bug Debugging Package User`s Manual Part 2 of 2

BDebugging Package Messages
B
The following tables list the debugging package error messages.
Table B-1. Debugging Error Messages
Message
Meaning
Error Status: xxxx
Disk communication error status
word when IOP command or
.DSKRD, or .DSKWR TRAP #15
functions, are unsuccessful. Refer to
Appendix F for details.
*** Illegal argument ***
Improper argument in known
command.
Invalid command
Unknown command.
Invalid LUN
Controller and device selected during
IOP or IOT command do not
correspond to a valid controller and
device.
*** Invalid Range ***
Range entered wrong in BF, BI, BM,
BS, or DU commands.
Long Bus Error
Message displayed when using an
unassigned or reserved function code
or mnemonic.
part of S-record data
Printed out if non-hexadecimal
character is encountered in data Þeld
in LO or VE commands.
RAM FAIL AT $xxxxxxxx
Parity is not correct at address
$xxxxxxxx during a BI command.
B-1