Download 1978 , Volume , Issue July-1978

Transcript
Thermocouples
f
Valves
Analog
Outputs
Switches
Computer
Intelligent
Terminal
2240A
Measurement
and
Control
Processor
Event
Detection
Digital
Outputs
Rotating
Equipment
Contactors
Counting,
Timing,
Frequency
Positioning
HP-IB Connection to Local or Remote Computer
Photocells
Conveyors
HP 2240A Measurement and Control
Processor, including Control Card.
Four Plug-In Function Cards
Service up to 128 I/O Channels.
Fig. 1. A general measurement
and control system consisting of
the 2240 A Measurement and Con
trol Processor linked to a digital
computer by the HP interface bus
and to appropriate sensors and
actuators by plug-in analog and
digital function cards. The sen
sors, actuators, and function
cards vary with the application.
HP 2241 A Extender Adds
Four Function Card Slots.
HP 2240A Control Card with
Silicon-on-Sapphire Components
• 16-Bit Microprocessor
• 6K ROM for Control and Diagnostics
• 1K RAM for Buffer Memory and Built-in Clocks
• HP-IB Interface Processor
HP 22920A Signal Condition Tray
Shown with Signal Conditioning Card Installed
HP 22922A Termination Strips and
Unterminated Cables
HP 22909A Test Fixture for Off-Line
Verification Using HP 2240A ROM
Diagnostics
Fig. 2. System. of the 2240A Measurement and Control Processor System.
© Copr. 1949-1998 Hewlett-Packard Co.