Download PDF (printable) Manual

Transcript
45
Fractal Zplot Application Help
mutually exclusive with the Newton, Convergence and Boundary Scan flags. The default method of
display actually only checks if z passes through 1. This is similar to the epsilon-cross mapping
method. For the original renormalization formulas, there is a strong orbital attraction to 1. For other
functions, this mapping produces unusual effects (with obscure mathematical foundations.) For the
built-in functions, the convergence tests (type 2 or 3 and 6-8 display types) are the same as the ones
used with the Newton flag. So either method produces similar results with the same formula. The
differences are worth playing with, though.
Original picture
With renormalization
5.8.8
Convergence
Convergence
With the Convergence flag set, the program does a convergence/periodic check on all points. This
is similar to the convergence checks done with Newton and Renormalization, but also the orbits of
each point are saved to determine if the orbit repeats. When an orbit repeats, the iteration loop is
broken and the point colored according to its break time. Depending on the iteration limit, the last
200 points of each orbit are tracked for this check. This flag is mutually exclusive with the Newton,
Renormalization, and Boundary Scan flags. May use Newton display methods 3 and 6-8(alternate
convergence tests), by setting the arg gadget to these values.
5.8.9
Default Function
Default Function
When this option is enabled (off by default), convergent functions are iterated according to their
original type. Fractal ViZion allows treating a renormalization curve as a Newton curve, or vice
versa, but the governing flag must be set through the flags menu. The Default Function option allows
a built-in function to work as a Newton or renormalization curve without those flags being set.
Newton functions work only as Newtons and likewise for renormalization formulas. Function types
© 2003 - 2010 ... Mystic Fractal