Download ShapeGrabber 3D Scanning Systems-

User’s Manual – October 2001
Table of Contents
II
Disclaimer
ShapeGrabber Incorporated provides the information and data included in this document for
the benefit of its customers, however, it is not possible to verify and test all of this information
in all circumstances, particularly information relating to non-ShapeGrabber manufactured
products. ShapeGrabber makes no warranties or representations related to the quality,
content, or adequacy of this information. Every effort has been made to ensure the accuracy
of this manual; however, ShapeGrabber assumes no responsibility for any errors or omissions
in this document. ShapeGrabber shall not be liable for any errors or for incidental or
consequential damages in connection with the furnishing, performance, or use of this manual
or the examples herein. ShapeGrabber assumes no responsibility for any damage or loss
resulting from the use of this manual; for any loss or claims by third parties which may arise
through the use of this software; for any loss or claims by third parties which may arise
through the use of this hardware; and for any damage or loss caused by deletion of data as a
result of malfunction or repair. The information in this document is subject to change without
notice.
ShapeGrabber products are protected by numerous US and worldwide patents including:
US4,645,347
US4,658,368
US4,819,197
US5,018,854
US5,075,561
US5,270,795
CDN1,272,406 CDN1,253,581 CDN1,313,235 CDN1,316,590 CDN1,319,188 CDN2,101,996
ShapeGrabber and ShapeGrabber® are registered trademarks of ShapeGrabber Incorporated.
Windows® 95 and Windows® 98 are registered trademarks of Microsoft Incorporated. All
other products, brand names, company names are trademarks or registered trademarks of
their respective companies.
This document contains proprietary and confidential information of ShapeGrabber
Incorporated. The contents of this document may not be copied or duplicated in any form, in
whole or in part, without prior written consent from ShapeGrabber Incorporated.
© ShapeGrabber Incorporated, 2001. All rights reserved.
ShapeGrabber Incorporated
2500 Don Reid Drive, Ottawa, Ontario, Canada, K1H 1E1
Tel: (613) 247-1707 • Toll free: (866) SCANS3D • Fax: (613) 247-2001 • E-mail: [email protected]
Copyright © 2001
www.ShapeGrabber.com
All Rights Reserved