Download "user manual"
Transcript
Acceleration and Deceleration Characteristics Setting Acceleration and Deceleration Times The acceleration time indicates the time to increase the speed from 0% to 100% of the maximum speed set in E1-04. The deceleration time indicates the time to decrease the speed from 100% to 0% of E1-04. Four separate acceleration and deceleration times can be set. They can be switched over between using: • digital input signals • the automatic accel./decel. time switch over function with a changeable switching speed level The display unit and the setting range for the times can be selected between 0.0 sec. or 0.00 sec. Related Parameters Parameter No. 6 Name Factory Setting Change during Operation Control Methods V/f Open Closed Loop Loop Vector Vector Closed Loop Vector (PM) C1-01 Acceleration time 1 Yes Q Q Q Q C1-02 Deceleration time 1 Yes Q Q Q Q C1-03 Acceleration time 2 Yes A A A A C1-04 Deceleration time 2 C1-05 Acceleration time 3 Yes A A A A No A A A A C1-06 C1-07 Deceleration time 3 No A A A A Acceleration time 4 No A A A A No A A A A No A A A A Q Q Q - - - - Q - - A A 1.5 sec C1-08 Deceleration time 4 C1-10 Acceleration/deceleration time setting unit C1-11 Deceleration time switching frequency S1-26 Dwell at start speed reference 1 0.0 Hz 0.00% 0.0 Hz No No Multi-function Digital Inputs (H1-01 to H1-05) Control Methods Set Value Function V/f Open Closed Closed Loop Loop Loop Vector Vector Vector (PM) 7 Acceleration/Deceleration switch over 1 Yes Yes Yes Yes 1A Acceleration/Deceleration switch over 2 Yes Yes Yes Yes Setting Acceleration and Deceleration Time Units Set the acceleration/deceleration time number od decimals using C1-10. The factory setting is 1. Set value 6-20 Details 0 The acceleration/deceleration time setting range is 0.00 to 6000.0 in units of 0.01 s. 1 The acceleration/deceleration time setting range is 0.00 to 600.00 in units of 0.1 s.