Download 959 Hot Cathode Controller Operation and
Transcript
13.6.3 Protect Pressure - PRO Description: Assigns the protection pressure for the Hot Cathode sensor. This is the value at which the Hot Cathode sensor’s filament will automatically have power removed from it so that it can be protected from exposure to high pressures. At pressures above this value, power is removed from the Hot Cathode filament and can not be reapplied by the user; at pressures below this value, power may applied to the Hot Cathode filament. The query response returns the current protect pressure. A default protect pressure exists at 1x10-2 Torr. The PRO command overrides the default protect pressure with a user selectable value that may be more appropriate for the user’s application. The protect pressure is not user assignable when the Controller is in the Combined or Control Set Point mode of operation. Keyword: PRO Type: Command and Query Parameter: numerical value expressed in scientific notation Limits: Min = 1x10-6 Torr Max = 1x10-2 Torr. Reset Value: 1.0E-2 Torr Query Response: numerical value expressed in scientific notation Related Keywords: SPx, CSP Examples Query: Query Response: Command: Query: Query Response: PRO?; ACK1.0E-2; PRO!2.0E-3; PRO?; ACK2.0E-3; 959 Hot Cathode Controller A-7