Download 2. AC Manager installation

3. AC Manager Operation
Wind strength
A function adjusting the wind strength to weak, medium, strong and auto.
ENGLISH
Wind direction
The wind direction of air conditioner can be set.
Lock
There are All lock, temperature lock, Mode lock and Wind strength lock. temperature lock is for locking
temperature setting function, Mode lock is for mode setting function, wind strength lock is for wind
strength function. All lock is for locking all functions. Once lock is set, wire or wireless remote control
isn’t possible.
Caution: Temperature lock
If the temperature lock command is sent at the temperature out of the desired
temperature range, the device may not normally operate for the setting temperature,
so be sure to set temperature lock at the temperature within the desired temperature
range.
Caution: Individual lock setting(Temperature, wind strength lock)
Individual lock setting(Temperature, wind strength lock)
When 2-pin connector of PI485 is inserted, changing mode from wire remote controller
may change to previous mode during temperature and Wind Lock setting. In this case,
if you set temperature lock and Mode lock at the same time, you can solve this
problem. If 2-pin connector of PI485 is connected, we recommend you to use Temp
lock and Mode lock at the same time.
Desired temperature
Using (+), (-) button set the desired temperature. The desired temperature can be set between 18 and
30°C when cooling and heating, and if you press setting button, the temperature setting command is
sent to the indoor unit. If you preset the desired temperature setting range, the temperature can be set
within that range. When removing humidity or Wind is selected in operation mode, temperature cannot
be set.
2
Air conditioner ventilation mode
- Operation mode
Icon
Description
Electric heating
Ventilation mode of supplied/discharged air through electric heating exchanger.
In summer/winter when temperature and humidity difference between indoor and
outdoor is big, use electric heating mode.
Normal
Ventilation mode of supplied/discharged air not through electric heating exchanger.
Used in spring/fall when temperature and humidity difference between indoor and
outdoor is small
AC Manager Installation/User’s manual
3-24