Download SimNow User Manual

User Manual
A.7.9
November 2010
AMD-8151™ AGP Bridge
1 simnow> amd8151.usage
Automation Command
SetRev <Rev>
GetRev
Description
Sets the internal Chip revision number of the AMD-8151 AGP
device, value must be between 1 and 255.
Gets the internal Chip revision number of the AMD-8151 AGP
device.
A.7.10 VGA
1 simnow> vga.usage
Automation Command
Bios <filename>
GetBios
VGA (0|1)
GetVGA
GetConfig
Description
Loads the specified BIOS file.
Returns the active BIOS file name.
1 enables the VGA, 0 disables it.
Returns current status of the VGA registers, true if enabled and
false if disabled.
Displays VGA configuration.
A.7.11 Serial
1 simnow> serial.usage
Previous versions of the simulator always used only the named-pipe format. Because of
this, the named-pipe was created as soon as the BSD was loaded. Because the new
version allows you to dynamically alter the communications method, the transport is not
created until you hit "go" for the first time (or after making any change to the transport
method). What this means is that if you are using a named-pipe, you will have to press
"go" before the named-pipe is actually created
Automation Command
SetLoopback (0|1)
GetLoopback
236
Description
0 disables loop back, 1 enables loop back.
Returns „true‟ if loop back is enabled; otherwise it returns
„false‟.
Appendix A