Download spindlepro guide pdf - MAL Manufacturing Automation Laboratories

In “Add New Material” window, the user is required to enter the material properties
which the spindle, housing, disk and motor is made of.
Description: Designation of the material. It should be less than 30 character-long otherwise
it will be truncated.
Young’s Modulus (N/m2): Young’s modulus of the material
Poisson’s Ratio: Poisson’s ratio of the material
Density (kg/m3): Density of the material
Shear coefficient: It is a factor that accounts for variation of strain over cross-sectional area
and is dependent on the shape of cross-section. For a circular beam, a value of 10/9 is
usually assumed. Setting this factor equal to 0 reduces it to Euler-Bernouilli Beam.
MAL Inc. User Manual for SpindlePro.exe
12/67