Download Podium Plus Data Analysis Software User Manual

Transcript
Podium Plus Data Analysis Software
User Manual
12.1.6 Data Logging
Click the Data Logging tab to display the Data Logging page (Figure 36) of the Setup
Data Logger Dialog.
Figure 36 - Setup Data Logger (Data Logging Page)
Number of Magnets
Enter a number or use the up/down arrows to set the number
of magnets fitted to the sensing wheel.
Wheel Turns Per
Sample
Enter a number or use the up/down arrows to set the number
of turns per sample value.
Wheel Circumference
Enter a number or use the up/down arrows to set the wheel
circumference value.
Engine Pulses
Enter a number or use the up/down arrows to set the number
of sensor pulses for two revolutions of the engine.
Enable Data Logging
Check the box to enable data logging.
Clear Memory
Check the box to clear the data logging memory.
Issue 1.10
Page 62 of 72
February 2005