Download Shelf Manager User Guide

Transcript
Pigeon Point Shelf Manager User Guide
NAME
TYPE
DEFAULT
DESCRIPTION
CAN BE
OBTAINED
FROM
SHELF
FRU INFO
INTEGRALHPI_
KEEPALIVE_IN
TERVAL
Number
2
INTEGRALHPI_
KEEPALIVE_PR
OBES
Number
5
INTEGRALHPI_
KEEPALIVE_TI
ME
Number
10
INTEGRALHPI_
SESSION_EVEN
TS_CAPACITY
Number
100
INTEGRALHPI_
SHELF_ENTITY
_LOCATION
Number
1
IPMB_ADDRESS
Number
0
Release 3.5.1
This configuration parameter applies
to TCP-based IntegralHPI sessions; it
is used to set the interval (in seconds)
between successive keepalive
probes.
This configuration parameter applies
to TCP-based IntegralHPI sessions; it
is used to set the number of
unacknowledged probes to send
before considering the TCP session
to be dead.
This configuration parameter applies
to TCP-based IntegralHPI sessions; it
is used to set the interval (in seconds)
between the last data packet sent and
the first keepalive probe.
The maximum number of entries in
the event queue for each IntegralHPI
session. When choosing this number,
the memory capacity of the ShMM
should be considered. Each event
queue entry occupies approximately
300 bytes and 64 simultaneous
IntegralHPI sessions are supported.
Therefore, increasing this number by
1 causes the Shelf Manager to use
19.2 Kbytes of additional ShMM
memory.
The entity location for the
AdvancedTCA Shelf HPI Resource;
used to differentiate, on the HPI client
level, among multiple shelves whose
Shelf Managers support HPI.
The IPMB address of the Shelf
Manager, overriding the hardware
address. The value of 0 causes the
Shelf Manager to read the hardware
address from hardware and set IPMB
address to hardware address * 2.
62
Yes
Yes
Yes
Yes
Yes
No
August 17, 2015