1
Download - Banner Engineering
Transcript
2/2010 PresencePLUS Software Tools Enhanced Description Character Settings Additional Information Box Width unless the Oversized characters has Discard selected, in which case, for example, a 5 pixel character will be ignored. Enable Adaptive Max Box Width If a box reaches the Max Box Width without finding a natural character ending, when Enable Adaptive Max Box Width is checked, the senor will adjust the right edge of the box tofind a most likely endpoint for a character. Undersized characters • When Discard is selected, the sensor will reject proposed boxes that do not meet the minimum requirements (see Minimum Box Width above). • When Extend is selected, the sensor will make the character fit the box. Oversized characters • When Discard is selected, the sensor will reject proposed boxes that do not meet the maximum requirements (see Maximum Box Width above) . • When Split is selected, the sensor will split the character into multiple characters. Character Connectivity Calibration Intra-Character Connectivity defines the maximum number of pixel spaces between two character strokes so that both strokes will be considered part of the same character. In the example below, if the Horizontal Gap were defined too small, the "H" could be considered an I - I. Banner Engineering Corp. Minneapolis, MN USA 219
