Download VL Manual - To Parent Directory

VIEWLOG SYSTEMS
Database Management System
Toronto, Ontario
Canada
October/04
Note: As mentioned in previous sections, it is very important to set up Log
Templates, either for cross section or Log Presentations. In this task, we will
create a Template HDR file for displaying the Geophysical Logs. Alternatively
the completed template can be use C:\VL Tutorial\Geophys Model\Completed
Tutorial\Geophysical Template.HDR.
PROCEDURE:
1. Select File/New Log File. You should see a blank log file, which displays only a
depth track.
2. Select Edit/Create New…
3. Select Uneven Depth Spacing Log
a. Repeat this process five more times to create a total of 6 new tracks.
4. Right-click on the furthest left track, and select Attributes.
a. Use the Log Name bar at the top of the window to select the first track.
b. Change the Log Name to Gamma
c.
Repeat this procedure for the other logs, which you would like to see displayed.
Note: For this tutorial will create 8 more tracks; Density, Neutron, Caliper, SP,
PR, Sonic Velocity, Magnetic Susceptibility, Inductive Conductivity.
d. Click on OK.
5. Select the Format/Display List menu item (or select F11) to activate the Display List
window.
a. Change the Track Number for Gamma to 3, Density to 4, Neutron to 5 etc.
b. Click on OK.
c.
Right click on the Gamma Log, and select Attributes (right click with the mouse
in the track window).
d. Select the Database tab.
e. Check on Database Linked and Read only.
f.
Hit Refresh, and fill out the table as shown in the figure below.
Page 207