Download Pan-Tilt Unit (E Series) Command Reference Manual

B‐CompatibilityMode
E
Both E Series PTUs and the PTU‐E46 include a compatibility mode switch to ensure backward compati‐
bility with previous models. This gives users the flexibility to either maintain backward compatibility when required or take advantage of the E Series enhancements. Enabling compatibility mode makes the PTU operate as a Series D unit. Disabling compatibility mode enables E Series behavior.
•
PTUs with firmware versions earlier than 3.1.4 have compatibility mode enabled by default.
•
PTUs with ISM or with firmware version 3.1.4 and later have compatibility mode disabled by default This is the recommended setting for newer PTUs.
Note: Enabling stabilization on an ISM‐equipped E Series PTU automatically disables compatibility mode.
B.1‐Commands
The available compatibility mode commands are:
•
•
•
CM
CME
CMD
B.2‐Syntax
•
•
•
Query compatibility mode status:
Enable compatibility mode:
Disable compatibility mode:
CM<delim>
CME<delim>
CMD<delim>
Copyright 2014, FLIR Commercial Systems, Inc.
115