Download Digital IR Hardware - Listen Technologies

Transcript
Aladdin Digital Infrared Language Distribution
8.
Technical Data
Installation and User Manual
8.1. System Specification
This section describes the specifications of the full
System Performance
system, infrared transmitter, radiator, receiver,
Conforms to IEC 60914, the international standard
headphones, battery pack and charging case. It also
for conference systems
describes the connection details and gives a list of
the display languages.
Conforms to
IEC 61603-7,
the international
standard for digital infra-red transmission of audio
signals for conference and similar applications
Transmission Characteristics
IR transmission
wavelength
870 nm
Modulation
frequency
Carriers 0 to 5: 2 to 6 MHz,
according to IEC 61603-7
Carriers 6 and 7: up to 8 MHz
Protocol and
modulation
DQPSK, according to
IEC 61603-7
System Audio Performance
(Measured from the audio input of an Aladdin T8
transmitter to the headphone output of an Aladdin
R8 receiver.)
Audio frequency
response
20 Hz to 10 kHz (-3 dB)
at Standard Quality
20 Hz to 20 kHz (-3 dB)
at Perfect Quality
Total harmonic
distortion at 1 kHz
< 0.05%
Crosstalk attenuation at
1 kHz
> 80 dB
Dynamic range
> 80 dB
Weighted signal-tonoise ratio
> 80 dB(A)
Cabling and System Limits
Televic Conference Systems
Cable type
50 Ohm RG58
Maximum number of
radiators
30 per HF output
Maximum cable length
900 m per HF output
2011-09-01
63