1
Download Integrate QuickStart into your System
Transcript
3b Configuration (Position Mode) Integrate QuickStart into your System 3. Select the check box for Position Loop Enabled. 4. In the Position Loop window, click the Limits button to open the Position Limits tab in General Drive Configuration. 5. Enter values for In Position Window, Position Following Error Window, and Max and Min Target Position Limit. 6. Set the Measured Position Value to zero (0) counts. 7. Click “OK” to accept values and close General Drive Configuration. 30 Advanced Motion Controls · 3805 Calle Tecate, Camarillo, CA 93012 Phone: 805-389-1935 · Fax: 805-389-1165 · www.a-m-c.com
