Download Gas Control Manager Program User Manual

Gas Control Manager Program User Manual (FB107)
sixteen causes. For this reason, it is best to plan your effects first, and then
decide what triggers those effects.
You may wish to use a chart such as the one pictured below as a handy
way to organize your information. The effects are located across the top of
the table in columns, and the causes are listed down the left side of the
table for easy reference:
Figure 17. Cause and Effect sample matrix
Appendix A provides a full sample matrix. Use the sample or make your
own design.
To start the Cause and Effect Program:
1. Double-click a FB107 or click the Direct Connect icon in the toolbar.
2. The device window opens. Click User Program > Gas Control Mgr
in the ROCLINK configuration tree.
3. Double-click Display #23, Effect Configuration.
4. A display appears for each effect point. Double-click an effect point to
see the Effect Configuration window for that station.
Each effect represents a particular action that occurs when the causes that
are linked to it are tripped or cleared. The Value When Active is the value
24
Issued Aug-14