Download Storage Commander manual

Transcript
Storage Commander User Manual
1 Installation and Setup
1.1 INSTALLING STORAGE COMMANDER
To install Storage Commander, place the Storage Commander CD -ROM into the computers CD-ROM drive.
If your computers CD-ROM drive is set to automatically run CD-ROM programs, the install program for Storage
Commander will automatically start. Follow the on-screen instructions to complete the installation.
If your computer’s CD-ROM drive is not set to automatically run CD-ROM based programs, follow the steps below
to install Storage Commander:
Click the Start button and choose Settings/Control Panel.
In the Control window, double-click the Add/Remove Programs icon.
For Windows Vista / Windows 7users, the control panel is located in the Start menu.
From the “Add/Remove Programs Properties” dialog box, click on the Install button.
Insert the Storage Commander installation CD into the CD ROM drive and click on the Next button.
In the “Run Installation Program” dialog box, move the mouse pointer into the “Command line for installed
program” and left click.
Type in the following: D:startup.exe (where D: represents the drive letter of your CD ROM drive).
Click on the Storage Commander button to start the installation process. It is recommended that you use the default
installation settings, unless you are an experienced computer user.
1.2 STARTING STORAGE COMMANDER
After the installation you will find a new Storage Commander icon on your Windows desktop, double clicking on
the Storage Commander icon will launch the program.
The first screen displayed is the logon dialog:
The first time Storage Commander is run you must
type in ADMIN as the login ID and PASSWORD as
the password.
After you have logged in, you can open the
Maintenance/Security pull down menus to assign
unique id’s and passwords as well as security access
levels to your staff (see section “Setting Login &
Password access”).
1.3 FACILITY SETUP
As with any management program, you will need to set up the operational parameters of Storage. If you purchased
Facility Set-Up, most of the parameters needed to be in place prior to customer move in have already been entered
into the system and you can skip to Basic Operations.
If Facility Setup has not been completed please continue with this section.
2