Download User Manual

User Manual
�
Bridge Mode: retransmit by SWITCH.
WEB
Interface
NAT
1.
1.NAT
1) LAN IP and LAN Subnet Mask
Settings
Introduction
It is efficient if you select “NAT” for Retransmits Mode. You
should set LAN IP and LAN Subnet Mask
Generally speaking, you can use the default values.
2.Disable
3.Bridge
7.2.1.3
Network Address Server Settings (DHCP Server)
Generally
Introduction
DHCP Server is another kind of Network function.
G502 can supply DHCP service for the network which is linked with
G502’s LAN if you enable the DHCP Server of G502’s LAN (Default
setting is enable.)
WEB
Interface
Page 21 of 44