Download PPD User Manual - Smart Access Ltd

SALTO PPD 200
Page: 5
WORKING WITH THE PPD.
The PPD main menu has up to 5 different functions, depending on
which information we have downloaded from the management PC.
•
Lock list
This PPD menu option is used for two functions: it shows the
doors requiring an update, or, it automatically updates the Electronic
Furniture that is connected to the PPD.
It is recommended to connect the PPD to the PC when finishing all
updates, in order to transfer the real current information about the battery
status and actions made to the software.
•
Collect audit trail
This PPD menu option is used to collect the audit trail events from
one or several doors and then lets you view the audit trail in the computer
display.
Therefore, every time you collect one or several audit trails from the
Electronic Furniture, you need to connect the PPD to the computer and
transmit all the data to it thus allowing you to view audit trail information on
the PC display.
•
Emergency opening
It is possible to open a door in a system with this function, without
the need of an authorised I-button. Generally, it is used to open Electronic
Furniture which has dead batteries .To activate emergency opening you
will need to use the special cable with the three pin connector (provided in
the PPD box).
Whether the EMERGENCY OPENING option appears or not in the
PPD main menu depends on whether you enabled it or not in the PPD
control menu in the software ( TOOLS/ OPTIONS/ PPD).
5