Download Installation & Configuration
Transcript
Installation and Configuration 7 In either case, each uniBasic installation is identified by a unique 32-bit license number, generated by the Passport daemon. This license number, along with a DCI supplied Software Selection Number (SSN) activates your installation for various DCI products and configurations. A license number is expressed as an 8-character hexadecimal value, such as 99D04832. The first two characters represent a specific operating system and/or hardware platform, in this example 99 = SCO Unix, for which the license is granted. Licenses are not transferable to other platforms. A special directory, /etc/DCI, is created during installation to maintain security specific information and files for use by all Dynamic Concepts software products. Typically, the following text files are recorded within the directory: ¥ ssn DCI activation key for this installation. ¥ osn OEM activation keys enabling encrypted application software. ¥ passport.cmd Command text used to initiate the Passport daemon. ¥ passport.log Log file maintained by the Passport daemon with security information, licensing methods and errors. During installation and ubconfig, you may select the name and location of this file. If the installation utilizes software security, one additional binary file is created: ¥ license Warning: License number information for systems installed with Software licensing. Modification, deletion, renaming or moving the license file will possibly deactivate a software license number. Configuration of licensing is initially performed during installation, or by later usage of the supplied ubconfig utility. uniBasic Reference Manual