Download "user manual"

Functions to be assigned to the ASSIGN 1 (push-type) switch
Function
Content
OFF
Disables the switch.
F.MIC MONO/STEREO
Assigns the monaural/stereo switch
function when the stereo microphone is
connected to the MIC IN connector.
LOOP REC ON/OFF
Assigns the Loop Rec mode ON or OFF
function.a)
TEST OUT CHARACTER Assigns the function to switch whether or
not the characters are mixed to the video
signal to be output from the TEST OUT
connector.
MARKER ON/OFF
Assigns the ON/OFF function to display all
markers.b)
EZ FOCUS
Assigns the ON/OFF function of the EZ
FOCUS c) function.
RE-TAKE
Assigns the RE-TAKE function to the
switch.
ATW
Assigns the ON/OFF function of autotracing white balance.
RETURN VIDEO
Assigns the ON/OFF function to display
the image of the return video signal on
the viewfinder to the switch.d)
LENS RET
Assigns the same function as that of the
RET switch on the lens to the switch.
REC SWITCH
Assigns the VTR S/S (start/stop) function
to the switch.
TURBO SWITCH
Assigns the turbo gain function to the
switch.
ZEBRA ON/OFF
Assigns the zebra pattern display function
to the switch.
(Continued)
Chapter 4 Adjustments and Settings for Recording
4-111
4