Download User Manual

User Manual RFEX
Introduction
Introduction
RFEX (Radio Frequency EXposure software), the System Software for EMF measurements by Rohde
& Schwarz, is a dedicated solution for the measurement and evaluation of electromagnetic fields
(EMF). It is implemented as a standard Windows application, and has been developed to support the
operation of the following R&S measurement systems:
•
Portable System for EMF Measurements TS-EMF, Ident. No. 1158.9295
•
EMF Measurement System (with ESPI and an antenna array), Ident. No. 1158.9037
When used with one of these systems, RFEX takes care the remote control of the measurement
instrument and the antenna switching, of integrating and correcting the raw measurement data, of
saving the results and, if possible, of generating measurement reports. All these features can be
accessed and parameterised by the user from a standard Windows-style user interface.
The present manual first describes the requirements for the use of the software. Chapter 2 gives a
brief introduction to first time users in order to get familiar with RFEX. A full reference of the user
interface can be found in chapter 3, whereas chapter 4 explains in detail which data files are required
and generated by RFEX at run time. Chapter 5 deals with the details of the measurement process.
Throughout this manual, there will be many details which apply to the portable EMF measurement
system TS-EMF alone. These will be marked by the following special formatting:
*
Hints formatted like this are applicable to the portable EMF measurement
system TS-EMF only.
TS-EMF
4
E-1