Download User Manual

2.4 Documents
The following documents are supplied with each Digiquartz Broadband Pressure
Transducer.
SPECIFICATION CONTROL DRAWING (SCD)
The SCD is a drawing that contains information about the performance, characteristics,
environmental specifications, and physical dimensions of the unit.
CALIBRATION COEFFICIENT SHEET
The Calibration Coefficient Sheet contains the calibration coefficient values and the
associated modeling equations (see Section 5). The calibration coefficients are derived
from a calibration test run, and are unique to each Digiquartz Broadband Pressure
Transducer.
CERTIFICATE OF CALIBRATION
The Certificate of Calibration identifies the primary pressure standard(s) used to calibrate
the Digiquartz Broadband Pressure Transducer.
CERTIFICATE OF CONFORMANCE
The Certificate of Conformance certifies that the Digiquartz Broadband Pressure
Transducer was manufactured in accordance with the applicable engineering drawings,
process specifications, procedures, and specification control drawing. It also certifies that
the Digiquartz Broadband Pressure Transducer was tested against NIST-traceable primary
pressure standards, temperature standards, and pressure transfer standards that are regularly
checked and calibrated per documented Paroscientific procedures in accordance with ISO
9001 requirements.
10
•
• GETTING FAMILIAR
•
•