Download IQ Quick Programming Guide V3.604 - Security Help Desk

Version 3.604 (31/03/05) p7
INNER RANGE IQ PLUS. Quick Programmer’s Manual.
NEXT 23
Activate Walk Test.
Puts the system into Walk Test Mode. Any Zone activation causes Siren squawk and Zone Lamp to flash. Press <CLR> to exit.
The system will automatically exit from Walk Test if the “Walk Test Time” (Address 912) expires.
Walk Test only monitors for the Seal and Alarm (Un-seal) conditions. No indication of Zone Input Tamper state is provided.
NEXT 24
Auxiliary Control and Test.
Auxiliary number followed by
0
= Siren Speaker output.
1
= Aux 1 (Strobe output)
will toggle the Auxiliary Output On and Off.
3
= Aux 2 (Gen purpose Aux on Controller)
4 - 10 = Aux 4 to 10. (Gen purpose Auxiliaries on Expansion card)
NEXT 25
Trigger Test Report.
Triggers a Test Report to the Central Monitoring Station or the nominated “Domestic Dialer” Telephone.
NEXT 26
Activates the Battery Test.
Switches the Battery Charger Off for 5 seconds to test Battery voltage. 3 Beeps at end of Test = Battery OK. One long tone = Battery Voltage Low.
NEXT 27
Answer Call.
Causes the Controller to automatically answer the next incoming call and attempt to establish Upload/Download connection.
This operation will over-ride any other programming option that disables a remote Upload/Download connection.
Primary and Secondary Telephone Numbers.
View / Program the Primary and Secondary numbers. (Installer Only with Contact ID enabled (NEXT 505)).
NEXT 31
NEXT 32
5.3
Call Divert Telephone Numbers.
View / Program the Diver and Un-Divert numbers. The IQ will dial Call Divert when the system is fully armed and dial the Call Un-Divert number when
Disarmed.
DEFAULT USERS
User Number
D e s c r ip t i o n
User 1
Installer, C a n p e r f o r m a l l I n s t a l l e r o p e r a t i o n s , a n d a l l M a s t e r o p e r a t i o n s .
DEFAULT USERS
Factory Default PIN
2345 (or 234567)
User 2
M a s te r U s e r ( P r i m a r y M a s t e r ) , C a n p e r f o r m a l l t h e M a s t e r o p e r a t i o n s a n d h a s a c c e s s t o a l l A r e a s .
The Master operations include; Edit Users, Walk test Zones, Set Time & Date,
S iren/Strobe/Auxiliary Te s t i n g , F a u l t A n a l y s i s , V i e w S o f t w a r e V e r s i o n , Te s t B a t t e r y a n d D o o r B e ll
E nable/Disable.
The Master User can also perform all User operations. This includes Arming / Dis-arming the
s y s t e m , Is o la t i n g Z o n e s a n d V i e w h i s t o r y . T h e M a s t e r U s e r a u t o m a t i c a l l y h a s p e r m i s s i o n t o c o n t r o l
a ll the A r e a s , Z o n e s a n d A u x i l i a r y o u t p u t s i n t h e s y s t e m .
0123 (or 012345)
User 3 to 95
General Users ,(Can be programmed as a Master User (Secondary Master))
C a n p e r f o r m a v a r i e t y o f o p e r a t i o n s s u c h a s A r m i n g / D i s - a r m i n g , Is o l a t i n g Z o n e s a n d V i e w
History with various levels of functionality as defined by the User’s “User Type”.
None
User 96
Reserved for system functions
(e.g. Reporting Auto-arming etc.)
N o t a p p licable