1
Download CubeSuite+ V2.00.00 Integrated Development Environment User`s
Transcript
CubeSuite+ V2.00.00 APPENDIX B COMMAND REFERENCE Assemble list file format specification The assemble list file format specification options are as follows. - -lw - -ll - -lh - -lt - -lf/-nlf -lw [Description format] -lw[number-of-characters] - Interpretation when omitted -lw132 (80 characters in the case of display output) [Function] - The -lw option specifies the number of characters per line in a list file. [Application] - Use the -lw option to change the number of characters per line in any type of list file. [Description] - The range of number of characters that can be specified with the -lw option is 72 to 2046 (80 characters in the case of display output). An abort error occurs if a numerical value outside this range, or something other than a numerical value is specified. - If the number of characters is omitted, it is assumed that 132 has been specified. However, when an assemble list file is output to display, it is assumed that 80 has been specified. - The specified number of characters does not include the terminator (CR, LF). - If the -np option is specified, the -lw option is invalid. [Cautions] - A control instruction (WIDTH) with the same function as the -lw option can be described at the beginning of the source. The description format is shown below. Δ$ΔWIDTH R20UT2623EJ0100 Rev.1.00 Dec 01, 2013 Page 420 of 638
