Download sm-30bt user manual
Transcript
SM-30BT USER OPERATION MANUAL TABLE OF CONTENTS Safety Information …….………………………………………………………… 1 Park/Brake wire ………………………………………………………………….. 1 Installation/Removal ……….………………………………………………….. 2 Playable Disc, DVD Care, MP3 ……….…………………………………….. 3 Maintenance …………………………………………………………………….… 3 Replacing Remote Control Battery ………….…………………………….. 3 Remote Control …………………………………………………………………... 4 Remote Control Functions ……………………………………………………. 5 Front Panel ………………………………………………………………………… 6 Front Panel Functions …………………………………………………………. 7 Basic Setup …..…….……………………………………………………….….... 8-9 Bluetooth ………………………………………………………………………….. 10 Radio Mode ……………………………………………………………………….. 10 Music/MP3 Mode ……………………………………………………………….. 11 DVD Mode …………………………………………………………………………. 11 USB Mode …………………………………………………………………….……. 11 Auxiliary Mode (Input) …………………………………………………………. 11 Trouble Shooting …………………………………………………………..……. 12 Specification ………..…………………………………………………………….. 13 Accessories ………………………………………………………………….…..… 14 Safety Information Please read this manual thoroughly and keep in your vehicle for easy future reference. We highly recommend that you find a licensed professional installer for the installation of this product, it is illegal to watch DVD player while driving. CAUTION: This unit is a class 1 Laser Product. To prevent direct exposure to Laser system, DO NOT OPEN the unit. The Laser Beam may hurt or damage your eyes. If the unit requires adjustments, please contact Sumas Media. USE THIS PRODUCT SAFELY Make sure you fully understand the following safety information: When Driving Keep the unit at an appropriate sound level. Driving with the sound at a level that prevents you from hearing the sounds outside and around the car may cause an accident. When cleaning your interior Do not expose the product to any type of liquid or excessive moisture. This could cause short circuit, fire or other severe damage to the unit or you vehicle. When Parked Parking in direct sunlight, especially in the summer time can produce very high temperature inside you vehicle. This may cause the unit to not work properly. Let the interior of your car to cool down before turning on the unit. Note: Do not use or store player in dusty, high temperature or high humidity environments. Park wire/Brake wire Park wire is to connect to your parking brake (Hand brake) or your unit will not function, also for your safety; when car is operate will restrict you to play/watch DVD while driving, display shows: safety off, do not play DVD, But some make or model of automobile if you have problem to connect to your brake, you can also ground this wire to your car’s chassis, unit will play; but restriction will be disabled, so please do not watch your unit when driving! Replacing the Fuse When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. WARNING! NEVER replace any Fuse with higher amperage than the original. This may cause damage to your unit and/or your vehicle’s electrical wiring. 1 Installation Note: Remove the protection screws (A) before installing and operation the unit. Please find the front panel inside carry caddy. Reinstall panel by placing as flipped down position, insert panel left side into front adaptor first, then gently click right side into place. When completed correctly panel should be flip up in place. To remove the panel, gently pull out the right side first after flipped down. o This unit is designed for 12V DC, (connecting to other than 12V unit will be damage) negative ground operation system only. o When replacing a fuse, be sure to match the amperage as the original fuse. Using the wrong fuse may cause your unit not to function or even electrical shortage o The negative battery terminal must be disconnected before making connections, which can prevent damaging the unit due to short circuit. o Be sure to connect the color coded leads correctly according to the wiring diagram. Incorrect connections may cause damage or malfunction or even damage the vehicle’s electrical system. o Be sure to connect the speaker (-) leads to the speaker (-) terminal, and the speaker (+) leads to the speaker (+) speaker terminal and so on. Never cross connect the left / right channel speaker cables or to the vehicle body/frame. o Do not block the unit’s vents or heat sink. Blocking can cause heat to build up inside and may damage your unit. o After the completion of the installation. Reconnect negative cable of vehicle to the (-) battery terminal, and then press the RESET in the front panel with the push pin to set the unit to initial status. Please refer below. ( see picture below) Unit Reset Unit Installation & Removal 2 Maintenance Playable discs DVD, Video CD and CD discs that display the logos shown below can be played back on this unit. DVD video disc region numbers: (This unit is for region one ONLY) If you encounter region problems, please call toll free service number on back page, we will help you resolve if. DVD Care If you use an irregular disc it may jam the DVD player or not play, for this reason only use round discs Be sure to check all discs for cracks and scratches before playing, discs in those conditions will not play properly. Also, be sure to avoid touching the recorded (plain) side of the disk, avoid scratching the disc. Store CDs in case when not in use. Keep discs out of direct sunlight (it will cause them to warp and crack) to clean the CDs, wipe with a soft cloth from the inside of the disc outward. MP3 MP3 files on CD-ROM, CD-R and CD-RW are compatible with this unit. Discs compatible with ISO9660 level one and two or with ROMEO and JULIET, recorded discs with the multi sections can also be played. MP3 files are incompatible with the transportation of read-in files. The max character width of the folder name is 32.If the file is recorded through ROMEO and JULIET system, only the former 32 characters are displayed. While playing discs with MP3 and CD-DA, such as CD EXTRA and MIXED MODE CD the system can only switch between MP3 and CD-DA. The selected folder sequence of playing and other operations will be the sequence to write in the software. So the anticipated sequence of playing should not conflict with the actual playing sequence. However, there is, indeed some software that play sequence is allowed to be set. The file is compatible with Id3 label version 1.0 and 1.1, so as to display the music titles and authors. The enhancing function is valid only when playing MP3 in 32, 44.1 and 48 KHz sample frequencies 16,22,05,24, 32, 44.1 KHz can be played. The tone of MP3s file can usually be bettered when the bit rate is increased. This machine can play recordings between 8KBPS and 320 KBPS. However, in order to enjoy a good tone, we recommend discs over 128KBPS. !!!!!IMPORTANT!!!!! While naming an MP3 file, add relevant extending name “.mp3” This machine will play files with .mp3 as MP3; do not use this extending name on non mp3 files to avoid noises and other problems. MP4 Due to new DivX version restriction on decoding, this unit will play most of the DivX format but some of the newer version will not. It can also play most of the .avi files with MPEG 4 codec. Replacing Remote Control Battery * When the remote control operation range becomes an issue or none functional at all. Replace the battery with a new button cell. Make sure to purchase the same size battery. 1. Pull out the Battery Holder while pressing the stopper. 2. Put the button-type battery (+) mark upward into the battery holder. 3 3. Insert the Battery Holder into the Remote Control. Remote Control 4 REMOTE CONTROL FUNCTIONS 1. PWR: Power (on/off) SUB-T/REC: Language subtitle (on/off) MUTE: Mute enable/disable sound SRC: To switch between modes 2. BND/RDM: To select different bands (radio mode) To turn on random playing APS/PRG: Automatic scan/program (radio mode) ST/RPT: Stereo/Mono switch (radio mode) Repeat on/off 3. : Play/Pause : Stop Setup: For system settings Title: Title Menu Enter: Confirm/play : Directional buttons 4. Phone call pick-up/send/ring on OSD: Screen info Display : End phone call/ring off 5. 0-9: Number buttons for dialing phone calls GOTO: GOTO search RO/RS: Radio Scan 6. AF/TA/PTY – None functional buttons. (only for European models) 7. : Skip forward/next chapter/track : Previous/last chapter/track : Increase/decrease volume SEL: System settings CLK: Clock display button EQ: Preset sound effects (equalizer) N.P/Angle: Video switch/Angle Adjustment R.L/Language: Left/Right soundtrack switch dialogue language 5 Front Panel 1. 2. 3. 4. 5. 6. 7. 8. Release Button Menu Button RDM/Band Select button Source Button Four Way Directional button ST/RPT MIC Mute Button 9. USB Port 10. Play/Pause/APS button 11. CLK/ Button 12. TFT LCD Screen 13. Volume Button 14. Disc Slot 15. SD Slot 16. Reset Button 17. Eject Button 6 FRONT PANEL FUNCTIONS 1. – Front panel release button 2. Menu – System settings 3. Band/RDM – To toggle change between FM1/FM2/FM3/AM1/AM2 and Random Play 4. Source/Power – To turn the unit on and toggle between Modes DVD/CD/Tuner/USB/SD/AUX/Bluetooth modes 5. Four directional buttons – To change setting using up/down/left/right 6. ST/RPT – To change audio from Stereo/Mono/Repeat on/off 7. MIC – (microphone) Use when on Bluetooth mode 8. Mute– Mute 9. USB Port – For inserting supported USB device 10. APS/ 11. CLK/ – Reception Scan/Play/Pause – Clock display/Stop button 12. TFT LCD Screen – 3” Full touch TFT LCD Screen 13. Volume Knob – For adjusting volume levels 14. Disc Slot – For inserting discs 15. SD/MMC Slot – Memory Card Slot 16. Reset – To reset all setting to factory default 17. – To eject inserted discs 7 Basic Setup Powering the unit ON/OFF - Press the Source/Power button once to turn the unit on. Press and hold to turn off. Note: When using the remote, just press “PWR” power button once to turn unit on/off. Switching Modes - Press the Source/Power Button on the unit repeatedly to cycle through the Modes. When on the main screen, simply touch the desired icon. (See below) Main Screen Video Setting - To change settings, press MENU button on the panel or Setup on the remote control. Scroll down or touch the option you want to change directly on the screen, press to change settings. Play with these options to get the desired setting. Touch VMODE then to cycle through preprogrammed video settings. 8 Basic Setup cont. Audio Settings - To change settings, press the Menu or Setup on the remote control, then touch on the remote. Touch the screen on the desired “AUDIO” tab on the screen or press option, then press to change the settings. (Setup between 0-14) Play with these options to get the desired audio output. For the preset equalizer settings, simply touch EQ then to cycle through NORM, ROCK, POP and CLAS. System Mode Settings - To change settings, press the Menu on the screen or Setup on the remote control then touch “System” on the screen or press twice on the remote. Touch the screen on the desired option then press to turn settings on/off. Play with these options to get the desired setting. To change/set time touch or scroll down to TIME to adjust time, repeat steps ADJ, then touch the hour 00:00 section and press to change minutes. Note: Time is set to military time only, (24hr time mode). BLUETOOTH MODE Basic Operation 9 Pairing/link your cell phone - Operating “Bluetooth” mode: Select from the main screen by touching the icon or by pressing the “SOURCE” button repeatedly until “Bluetooth” is displayed. Press “Setup” on the screen, then press on/off and press “Connect”. Turn your cell phone’s Bluetooth on; select either “Search Audio Enhancement” or “Pair or link with Device”. Once your cell phone has done searching, the car DVD should display as “Car Kit”. Press “Connect” or “OK” on phone, when asked for a security code, Enter “0000” then press “Accept”. Once pairing/link completed both devices will say connected. You can now make and receive phone calls through your car DVD player. Note: Some phones will have a feature to allow the car DVD to connect to your cell phone automatically without a security code. Bluetooth Main Screen Bluetooth Setup Screen Bluetooth Call History Screen Making phone calls - - To make a call simply use touch dials from screen and press to send. To end the call press to end. You can review a history list of in/out calls by pressing the folder icon. to send. To redial, press the desired number on screen and then press To end connect and transfer call back to you cell phone, just press transfer on the screen. **When calls come in while you’re on the phone using Bluetooth, please be aware Bluetooth does not have call waiting feature, and this is how it actually works: While on the phone and another call comes in, you will hear 2 short soft beeps, as an alert on incoming call, which will be the only notification you get. There will be no display on the unit for the other incoming call; however your cell phone will display the incoming call. You can only pick up the 2nd call from your cell phone; otherwise inbound call will go into voicemail. Note: Some phones will repeat the beep at least twice depending on the brand of your phone and your service provider. Playing Music - Some Phones that have built-in music player, music can be play through the car DVD via Bluetooth. - All functions of the music player can only be control through your phone. However we do not recommend using this function while driving; it’s dangerous to take your focus away from the road. Note: When a call comes in, the unit will automatically switch to Bluetooth mode. Radio Mode - Press Power/SRC button on the unit, and then touch the “Radio” icon the screen. Band Select: Touch “BAND” to select from FM1, FM2, FM3, AM1 or AM2. Manual Tuning: Touch repeatedly to locate the desired frequency. Automatic Tuning: Touch and hold for 3 seconds to search available frequencies. Storing Radio Stations: To store stations to the unit, locate the desired station using , then press and hold the desired number on the remote control (from 1 to 6). Unit will beep once set. Repeat steps for the rest of the numbers and Band section. - Automatic Radio Station Storing: To randomly store available frequencies, Simply touch and hold the “APS” button for about 2 seconds then release. *NOTE: This unit can store up to 18 FM Stations (FM1=6, FM2=6, FM3=6) and up to 12 AM Stations (AM1=6 AM2=6). 10 Basic Operation cont. Music/MP3-4 CD Mode - - Inserting a CD: Press the “Release” to open front panel, then insert a Music or MP3 Disc into the disc slot with label facing up. Then push front panel back into place. Unit should automatically switch to “DISC” mode. The unit will start playing the first track on the CD. . Or Track Select: To skip forward or backwards through the tracks simply press ouch screen and submenu will appear with play control functions. (See Fig. A) Random Playing: Press “Band/RDM” button once to play track in random order, press again to turn random off. Repeat Play: Press “ST/RPT” button to repeat what’s currently playing, press again to turn off repeat play. For MP3 playing to repeat a whole folder press “RPT” 2x and 3x to turn off random. Fig. A DVD Mode - Inserting a DVD: Press the “Release” button to open front panel to insert DVD or VCD Disc into the disc slot. (Make sure label is facing up), Flip the panel back into place. Unit should automatically switch to “DVD” mode. The unit will start playing the content of the DVD. on the unit or touch the screen to bring up submenu - To skip or find chapters press controls. (See Fig. A) - Press ►II to pause and play movie. - For “Subtitle”. Simply press “SUB-T” on the remote to turn on/off. - For “Repeat playing” press “RPT” once to repeat “Chapter” (current track), twice for “Title” (the entire movie), and three times to end repeat play. USB/SD/MMC Mode (Note: USB PORT is for flash drive only, will not work for IPOD). - Inserting a USB media device: Remove the protective cover of the USB input, plug in device into the unit. (Unit will automatically switch to USB mode). If audio files are present, then the first track will play automatically. To view pictures press the ► right arrow on is highlighted on the bottom of the screen, then press the remote then ◄ left until the up arrow and then “Enter” to play the first file. For playing Videos repeat “Enter” then press above steps but highlight on the bottom of the screen. - Inserting SD/MMC memory card: Remove front panel (see page 1). Then insert the memory into the slot all the way in until the unit grabs the card, reinstall front panel back into the unit. Turn unit back on, and select the SD mode from the main menu. When removing memory card, first removed the panel, then lightly/ quickly push the memory card in for make ejecting of the card, then pull card out to remove. *Note: Random play is only available on pictures and audio files. Repeat play is available on all. AUX MODE - To use “AUX” (auxiliary) mode: Plug RCA audio/video cables into the “AUX input” on the back of the unit to your device. Press the SOURCE button repeatedly to select Auxiliary mode or go to the main screen and press “Input” icon. *Note: You can only control your device functions through the inserted device. 11 Trouble Shooting Problem Will not turn on. Remote control not functional. DVD/CD will not play, or play properly. No Sound/Volume or will not increase. Reason/Cause Conclusion/Solution Incorrect wiring connections. Insufficient battery power. Remote sensor blocked. Disk is dirty or scratched. Disc isn’t compatible with unit. Content of the disc is not supported. Incorrect wiring connection. Unit is on mute, playing frame by frame, fast forwarding or rewinding is turned on. Certain speaker will not output sound. Fader/Balance settings activated. Speaker(s) might be damage. LCD does not display picture, or say “picture off for safety.” “Brake in” wire not connected properly to the park brake wiring. /Parking brake is not applied or wiring not properly connected. When the unit powers on, there is a loud noise. USB flash drive or SD card will not read. The unit is reading inserted disc. The disc drive is resetting to its normal position. Loose or dirty connection. Or no connecting properly No subtitle. Subtitle in the wrong language. Videos/Pictures are obscure or blurred. Does not play Music/MP3 files. Bluetooth not making connecting to my phone. My Bluetooth phone will not connect or reconnect. MP4 video will not play. Can’t set “BASS” or “TREBLE” on set up Over capacity or not compatible Subtitle not activated. / DVD movie does not have subtitle in the desired language. Video/picture resolutions are low. Files are not supported. Bluetooth on the cell phone or the car DVD is turned off. /Not link properly. Bluetooth is enabled on both devices, or not paired properly. Require compatible MP4 format/codec. “EQ” is not on “ NORM” 12 Check all wires are properly connected. Please refer to the wiring diagram Replace battery. (page 3)/ Make sure there is nothing blocking the remote control sensor. Clean the disc with a soft cloth. Check disc compatibility. (see page 3) Try another disc that is compatible. Check all the speaker wires are connected properly with the unit and the speakers themselves. Un-Mute the unit. Make sure all the connections linking the speakers are properly connected. Make sure all the speakers work properly. Picture will only appear when parking brake is applied for safety. / Check wiring and make sure everything is properly connected. Make sure “Brake in” wire is properly connected to the hand brake or ground. Normal function. Check/clean connections. Make sure the USB flash/SD card drive is securely inserted into USB/SD port. Unit can only read up to 2- 4GB, depending on the size of the date Press “SUB-T” on the remote to switch on. Make sure DVD movie has subtitle with the desired language. Make sure the videos/pictures have the appropriate resolution for a 3” screen. Check that the files are supported. (see page 3) Make sure the files are converted correctly. Make sure Bluetooth is turn on both devices, and is link properly. Turn car DVD on/off. /try reconnect again. Redo Bluetooth connection process and try again. Some LG phone’s Bluetooth software is not compatible with the common Bluetooth program. See page 3 (MP4). When “EQ” is on other then “ NORM” no setting can be change, set “EQ” to “ NORMAL” Specifications General - Power Requirements …........ 12 V DC Load Impedance …………..……. 4Ω-8Ω Tone Control …………………….… ±8dB (Bass 100Hz, Treble 10KHz) Dimensions ……………………….… Approx. 7.36”D x 6.69”W x 2”H Mounting Dimensions …....... 7.50”D x 6.75”W x 2.25”H Weight …………………….………..…. 4.25lbs DVD Deck Section - Disc Play ……………………..…….…. MP4, DVD, VCD 1.0/1.1/2.0/3.0, MP3, CD, CD-R, CD-RW, PICTURE-CD Video System ……………..…….…. Auto/NTSC/AUTO Mounting Angle ……………………. 0° to +/- 30° Video Section - Video System ………………..….. 16:9 Wide screen Video Output Level …….……... 1.0Vp-p 75 ohms Horizontal Resolution ……….... 500 lines Audio Section - Maximum Output Level …….... 2Vrms (+/-3dB) Frequency Response ……….….. 20 to 20KHz Signal-to-Noise Ratio ……….…. 85dB Separation ……………….………….. 80dB AM Tuner Section - Frequency Range …………………. 530-1710 (USA) IF Range …………………….……..... 450 KHz Usable Sensitivity (-20dB) ….. 25dB FM Tuner Section - Tuning Range ………………………… 87.5 – 107.9 IF Range ……………………………….. 10.7 MHz Usable Sensitivity (-30dB) ……. 15dB Signal-to-Noise Ratio ……………. 60dB Stereo Separation …………………. 30dB (1KHz) Frequency Response …………….. 30~15000Hz 13 Accessories Faceplate Frame Dash Insert Casing Push Pin Wiring Harness Faceplate Caddy Screws Extractors Remote Control Manual Wiring Diagram 14