Download CENTAURI II User Manual

166
CENTAURI II User Manual
Jate, Austel
With both the Jate and Austel protocols, you MUST enter an ID.
Common Settings
The following settings are available for all protocols:
Get dialtone
When
is connected to a PBX or ISDN switch, it is often
necessary to add a number for external access (e.g. 9). Enter the number
required via this dialog.
Note:
This number precedes EVERY dialled number - even those ‘dialled’ using the
Connect or Phonebook buttons on the ‘wheel’ symbol displayed in the Remote
Control program window.
Predial No.
Sometimes it is necessary to use a special provider to guarantee the quality of
the ISDN service or the carriage of ISDN calls through a Gateway. Usually a
special provider can be selected by dialing a special call-by-call number
before the normal number.
This Predial Number precedes EVERY dialled number - whether it is dialled
by the Connect or Phonebook buttons, and is inserted AFTER the number
supplied by Get Dialtone.
Min. Digits for. Ext. Call
- determines the number of digits BEFORE the Get Dialtone number becomes
valid.
For example:
Copyright: 2008 Mayah Communications