Download instruction manual
Transcript
Maintenance of Splicing Quality 1-3. Cleaning Fiber Clamp Chips If contaminants are present on the clamp chips, proper clamping may not occur, resulting in poor quality splices. The fiber clamp chips should be frequently inspected and periodically cleaned during normal operation. To clean the clamp chips, do the following: Cotton swab (1) Open the wind protector. (2) Clean the surface of the clamp chip with an alcohol-impregnated thin cotton swab. Remove excess alcohol from the clamp chip with a clean dry swab. Fiber clamp 1-4. Cleaning Fiber Cleaver If the circular blade or elastomer clamp pads of the fiber cleaver become contaminated, the cleaving quality could degrade. This may lead to fiber surface or end-face contamination, resulting in higher splice loss. Clean the circular blade or elastomer clamp pads with cotton swab soaked with alcohol. Elastomer Clamp Blade cover Blade 27